2010/05/12 Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} Caterpillar


Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
`
2010/05/12 [SEPD1123]
ELECTRICAL AND STARTING SYSTEM
WIRING GP
2010/05/12 Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
AVSpare Products:
  • All
  • Service Magazine SEPD1123, 05 December 2010, "Bulk Wiring Harnesses Are Available for Use with AVSpare Products". Disregard this article. See the replacement article that follows.

    Four bulk wiring harnesses are available for use on AVSpare Products. the harnesses are available in 3, 6, 9, or 12 wire configurations. The harnesses can be used for external repairs to original wiring and the harnesses can be used for attachments that are installed at the dealership.

    The harnesses are wrapped in a yellow braid that is resistant to high temperatures. The length of the harnesses is 61 m (200 ft) and the harnesses are shipped on spools.

    The harnesses do not have terminals at the ends of the wires. Each wire is 14 AWG. Only use the harnesses when the 14 AWG is equal to or greater than the required size for the circuit.

    When you use a harness, protect the ends with heat shrink tubing in order to help prevent the braid from fraying.

    Each wire in each harness is marked along the length of the wiring for identification and each wire is a different color. The part numbers of the harnesses, the wire identification, and the wire colors are listed in Table 1.

    Table 1
    366-8856 Wiring Harness    
    REPAIR 1     Green    
    REPAIR 2     White    
    REPAIR 3     Orange    
    366-8857 Wiring Harness    
    REPAIR 1     Green    
    REPAIR 2     White    
    REPAIR 3     Orange    
    REPAIR 4     Blue    
    REPAIR 5     Yellow    
    REPAIR 6     Purple    
    394-6873 Wiring Harness    
    REPAIR 1     Green    
    REPAIR 2     White    
    REPAIR 3     Orange    
    REPAIR 4     Blue    
    REPAIR 5     Yellow    
    REPAIR 6     Purple    
    REPAIR 7     Black    
    REPAIR 8     Pink    
    REPAIR 9     Red    
    394-6874 Wiring Harness    
    REPAIR 1     Green    
    REPAIR 2     White    
    REPAIR 3     Orange    
    REPAIR 4     Blue    
    REPAIR 5     Yellow    
    REPAIR 6     Purple    
    REPAIR 7     Black    
    REPAIR 8     Pink    
    REPAIR 9     Red    
    REPAIR 10     Gray    
    REPAIR 11     Brown    
    REPAIR 12     Green    

    Information System:

    C15 and C18 Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
    2010/03/29 Procedure to Disengage the Cable Assembly Prior to Removing the Front Window on Certain Excavators {7310}
    C9.3 Tier 4 Final Engines Electric Starting System - Test
    349E Excavator Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
    (Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Specifications
    349E Excavator Hydraulic System Relief Valve (Main)
    2010/03/24 Improvements Have Been Made to Bulk Hose for Certain Caterpillar Products {5057}
    336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Assemble
    336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
    2010/06/08 The Starting Procedure is Revised for Certain Excavators and Mobile Hydraulic Power Units {1453}
    C13, C15, and C18 Tier 4 Interim Engines ARD Fuel Pressure Is Low
    C13, C15, and C18 Tier 4 Interim Engines ARD Fuel Pressure Is High
    349F and 352F Excavators Machine System Relief Valve (Line)
    Installation Procedure for 239-8695 Hydraulic Pedal Control Gp {5059, 5063}
    Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
    Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154}
    336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Hydraulic Oil Cooler - Remove and Install
    Installation Procedure for 259-5045 Combined Flow Wiring Gp {1408}
    Installation Procedure for 260-7986 Pilot Lines Gp {5057, 5059}
    Installation Procedure for the 260-8008 Front Lines Gp {5057}
    349F and 352F Excavators Machine Systems Shuttle Valve - Remove and Install - Straight Travel
    416E, 420E and 430E Backhoe Loaders MID 039 - CID 0041 - FMI 03
    69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Symptom Troubleshooting
    416E, 420E and 430E Backhoe Loaders MID 039 - CID 0041 - FMI 04