The Corrections for Parts Manual, HEBP1719-05 are Now Available {1000, 5057, 5061, 7000}
`
2001/07/30
[SEPD0589]
2001/07/30
A New Flexible Pump Coupling Improves Durability {5062}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
ENGINE ARRANGEMENT
2001/07/30
The Corrections for Parts Manual, HEBP1719-05 are Now Available {1000, 5057, 5061, 7000}
- Excavator:
- 214B (S/N: 4CF1-UP; 9MF1-UP)
Information in the above parts manual has been corrected. The corrections include the following changes:
- The cover of this parts manual has been changed. The new cover shows that the 214B has replaced the incorrect 2114B in the title.
- The inside cover has been changed. The inside cover shows that the 214B has replaced the incorrect 2114B in the title.
Note: The Parts Manual, HEBP1719-05, June 1994 does not contain an Illustration for the 8U-7205 Hydraulic Motor .
Note: A separate Illustration for 8U-7205 Hydraulic Motor is available in this Service Magazine. Refer to Table 1 for a parts list for 8U-7205 Hydraulic Motor. Illustration 1 shows the components of the 8U-7205 Hydraulic Motor .
The availability of a separate illustration for the 8U-7205 Hydraulic Motor in this Service Magazine should be noted on the following pages of the parts manual.
- The consist list that is located on page "218", page "218.00.04", and page "218.03.01" has the letter (Y) in the note column for the 8U-7205 Hydraulic Motor. The letter (Y) incorrectly indicated that a separate illustration was available for the 8U-7205 Hydraulic Motor .
- The caption that is located on page "218", page "218.00.01", page "218.00.04", and page "218.00.05" incorrectly indicated that a separate illustration for the 8U-7205 Hydraulic Motor was available on page "218.04".
Note: An Illustration for the 8U-7205 Hydraulic Motor does not exist on page "218.04".
Show/hide table
Parts of the 8U-7205 Hydraulic Motor     | |||
Item     | Qty     | Part Number     | Description     |
1     | 1     | 8U-3693     | Seal     |
2     | 2     | 8U-9302     | O-Ring Seal     |
3     | 2     | 3D-4245     | O-Ring Seal     |
4     | 1     | 096-0194     | Retaining Ring     |
5     | 1     | 8U-3695     | Cover     |
6     | 2     | 8U-3696     | Gasket     |
7     | 2     | 8U-9296     | Bearing Seal     |
8     | 2     | 8U-9300     | Pin     |
9     | 1     | 8U-9297     | Nut     |
10     | 1     | 5W-6014     | Washer     |
11     | 1     | 5W-8553     | Woodruff Key     |
12     | 1     | (1)     | Gear     |
13     | 1     | (1)     | Gear     |
14     | 2     | 8U-9299     | Pin     |
15     | 2     | 8U-3669     | Gasket     |
16     | 1     | (1)     | Housing     |
17     | 2     | 8U-3671     | Retainer Ring     |
18     | 1     | 8U-3697     | Cover     |
19     | 4     | 8U-9301     | Lockwasher     |
20     | 4     | 8U-9298     | Bolt     |
Show/hide table
( 1 ) | This part is not sold separately. You must purchase the 8U-7205 Hydraulic Motor Group in order to obtain this part. |
Show/hide table
![]() | |
Illustration 1 | g00814214 |
8U-7205 Hydraulic Motor |
Information System:
312C Excavator Machine Systems
Bucket Cylinder - Install
2001/07/16
An Improved Seal Kit for the Second Generation ALA Swivel is Available {5060}
Installation of the Update of the Swing Drive System for the 5130B Excavator{5057, 5058, 5059, 5459}
5130B Excavator Hydraulic System
Relief Valve (Main)
Installation of the Update of the Swing Drive System for the 5130 Excavator{5051, 5057, 5058, 5059, 5117, 5459}
315C Excavator
Quick Coupler Operation - Double Action (If Equipped)
312C Excavator Machine Systems
Bucket Cylinder - Remove
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Warning Operation
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Using the Operator Monitor to Determine Diagnostic Codes
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Travel Speed Lock Function
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Travel Speed Function
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
312C Excavator 3064 Engine Supplement
Fan Guard - Remove and Install
312C Excavator 3064 Engine Supplement
Fan - Remove and Install
325C and 325C L Excavator
Engine Speed Control
W345B Series II Material Handler Hydraulic System
Main Hydraulic System
W345B Series II Material Handler Hydraulic System
Main Control Valve
330C Excavator
Engine Oil and Filter - Change
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
Procedure for the Repair of Compensator Valves in the Main Hydraulic Control Valve{5051, 5086}
5230B Excavator Electronic Systems Guide
Related Components
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
385B Excavator
Monitoring System