2001/08/06 Change in Serviceability of Bristle Assemblies for the BP15, BP18, and BA18 Brooms {6335, 7000} Caterpillar


Change in Serviceability of Bristle Assemblies for the BP15, BP18, and BA18 Brooms {6335, 7000}
`
2001/08/06 [SEPD0590]
MACHINE ARRANGEMENT
2001/08/06 Change in Serviceability of Bristle Assemblies for the BP15, BP18, and BA18 Brooms {6335, 7000}
Broom:
BP15 (S/N: ACT)
BP18 (S/N: ADH)
BA18 (S/N: ACE)
Skid Steer Loader:
216 (S/N: 4NZ1-UP)
226 (S/N: 5FZ1-UP)
228 (S/N: 6BZ1-UP)
236 (S/N: 4YZ1-UP)
246 (S/N: 5SZ1-UP)
248 (S/N: 6LZ1-UP)
252 (S/N: FDG1-UP)
262 (S/N: CED1-UP)

The polypropylene bristle assemblies and the wire bristle assemblies for the Brooms that are listed are no longer serviced on an individual basis. Instead, the bristle assemblies are available as part of new brush kits that have been released. The part numbers of the new brush kits are provided in Tables 1, 2, and 3.

Table 1
Bristle Assemblies for BP15 Pickup Broom    
Type     Former     New    
Poly     165-9888 Polypropylene Bristle As     165-9069 Brush Kit (1)    
Wire     165-9887 Wire Bristle As     165-9070 Brush Kit (2)    
( 1 ) The kit consists of 18 165-9888 Polypropylene Bristle As .
( 2 ) The kit consists of 18 165-9887 Wire Bristle As .

Table 2
Bristle Assemblies for BP18 Pickup Broom    
Type     Former     New    
Poly     165-9888 Polypropylene Bristle As     165-9071 Brush Kit (1)    
Wire     165-9887 Wire Bristle As     165-9072 Brush Kit (2)    
( 1 ) The kit consists of 22 165-9888 Polypropylene Bristle As .
( 2 ) The kit consists of 22 165-9887 Wire Bristle As .

Table 3
Bristle Assemblies for BA18 Angle Broom    
Type     Former     New    
Poly     166-0300 Polypropylene Bristle As     166-0322 Brush Kit (1)    
Wire     166-0301 Wire Bristle As     166-0323 Brush Kit (2)    
( 1 ) The kit consists of 21 166-0300 Polypropylene Bristle As .
( 2 ) The kit consists of 21 166-0301 Wire Bristle As .

Information System:

2001/08/01 New Electronic Tachometers Have Different Connection To Wiring Harness {7462}
320C and 322C Forest Machines Hydraulic System Pilot Hydraulic System
2001/06/25 New Stiffener Plates Improve the Durability of the Front Skirt of Pickup Brooms {6708}
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines Air Inlet Heater Circuit - Test
Troubleshooting Guide for 122-9897 Implement Electronic Control Module {5702}
5130B Excavator Travel Control
5130B Excavator Track Roller and Idler - Check
5230B Excavator Hydraulic System Final Drive
365B, 365B Series II and 365BL Excavators Grapple and Magnet Control
5230B Excavator Hydraulic System Piston Pump (Swing)
H140CS and H160CS Hydraulic Hammers Hydraulic Hammer Troubleshooting
5230B Excavator Hydraulic System Piston Pump (Implement)
320C and 322C Forest Machines Hydraulic System Pilot Hydraulic System
365B and 365B Series II Excavators Lifting Capacities
385B Excavator Equipment Lowering with Engine Stopped
365B and 365B Series II Excavators Lifting Capacities
2001/08/13 An Improved Unit Injector Hydraulic Pump is Available {1714}
312C Excavator 3064 Engine Supplement Hood - Remove and Install
2002/07/08 New Final Drive Gp is Used for Improved Service Life {4050}
385B Excavator Cooling System Coolant (ELC) - Change
3126B Engine for Caterpillar Built Machines Throttle Position Sensor Circuit - Test
325D and 329D Excavators Machine System Specifications Track Roller (Single Flange)
385B Excavator Cooling System Coolant Level - Check
345B Series II Excavator Machine System Specifications Boom Cylinder