New Tilting Steering Column Gas Spring available for E and F series Backhoe Loaders {4310, 4338} Caterpillar


`
New Tilting Steering Column Gas Spring available for E and F series Backhoe Loaders {4310, 4338} [M0066494]
OPERATOR STATION
CONTROL GP-STEERING
New Tilting Steering Column Gas Spring available for E and F series Backhoe Loaders {4310, 4338}
Backhoe Loader
416E (S/N: MFG1-UP)
416F (S/N: KSF1-UP; LWT1-UP)
420E (S/N: DJL1-UP; DAN1-UP)
420F (S/N: LTG1-UP; LKH1-UP; JWJ1-UP; SKR1-UP)
422E (S/N: MAW1-UP)
422F (S/N: LRH1-UP)
428E (S/N: DPH1-UP)
428F (S/N: LBH1-UP; SJW1-UP)
430E (S/N: MXB1-UP; SWC1-UP)
430F (S/N: RDF1-UP; RGS1-UP)
432E (S/N: JBA1-UP)
432F (S/N: SEJ1-UP; LNR1-UP; PXR1-UP)
434E (S/N: SXB1-UP; SJL1-UP)
434F (S/N: LDH1-UP)
442E (S/N: EME1-UP)
444E (S/N: NBA1-UP)
444F (S/N: LJJ1-UP; FBN1-UP)
450E (S/N: RBA1-UP; LYR1-UP)
450F (S/N: HJR1-UP)

Description Of Change: The tilt steering column gas spring has been updated to include a dust seal around the rod. This seal prevents dirt and debris from damaging the seals.

Adaptable To: This change applies to the following models.

Table 1
Adaptable 
Sales Model  Serial Number Range 
416E  S/N:MFG1-151,1501-5050,6001-14422 
416F  S/N:LWT1-785 
416F ST  S/N:KSF1-2254 
420E PL  S/N:DAN1-319,321-2310 
420E ST  S/N:DJL1-3626,3628-4120 
420F  S/N:LKH1-151,153-516 
S/N:LTG1-1210,1215-2342
420F IT  S/N:JWJ1-3288 
420F ST  S/N:SKR1-5380,6996,45157 
422E  S/N:MAW242-1825 
422F  S/N:LRH1-2375 
428E  S/N:DPH223-687,689-4497 
428F  S/N:LBH1-5614,33976 
S/N:SJW1-425,430-707
430E IT  S/N:MXB1-571 
430E ST  S/N:SWC1-647,656 
430F IT  S/N:RGS1-376,378-762 
430F ST  S/N:RDF1-332,334-870 
432E  S/N:JBA171-2688 
432F  S/N:LNR1-754,756-1287 
S/N:PXR1-893
S/N:SEJ1-445,447-824,833-895
434E  S/N:SJL157-398,426-698,700-752 
S/N:SXB610
434F  S/N:LDH1-947 
442E  S/N:EME154-261 
444E  S/N:NBA153-417 
444F  S/N:FBN1-246 
S/N:LJJ1-528
450E  S/N:LYR1-159 
S/N:RBA1-301,303-352
450F  S/N:HJR1-202,204-500 

Table 2
Effective 
Sales Model  Serial Number Range 
416E  S/N:MFG14423-UP 
416F  S/N:LWT786-UP 
416F ST  S/N:KSF2255-UP 
420E PL  S/N:DAN2311-UP 
420E ST  S/N:DJL4121-UP 
420F  S/N:LKH517-UP 
S/N:LTG2343-UP
420F IT  S/N:JWJ3289-UP 
420F ST  S/N:SKR45158-UP 
422E  S/N:MAW1826-UP 
422F  S/N:LRH2376-UP 
428E  S/N:DPH4498-UP 
428F  S/N:LBH33977-UP 
S/N:SJW708-UP
430E IT  S/N:MXB572-UP 
430E ST  S/N:SWC657-UP 
430F IT  S/N:RGS763-UP 
430F ST  S/N:RDF870-UP 
432E  S/N:JBA2689-UP 
432F  S/N:LNR1288-UP 
S/N:PXR894-UP
S/N:SEJ896-UP
434E  S/N:SJL753-UP 
S/N:SXB611-UP
434F  S/N:LDH948-UP 
442E  S/N:EME262-UP 
444E  S/N:NBA418-UP 
444F  S/N:FBN247-UP 
S/N:LJJ529-UP
450E  S/N:LYR160-UP 
S/N:RBA353-UP
450F  S/N:HJR501-UP 

Rework

Table 3
Part List 
Item  Qty  Part Number  Part Name 
338-1508  Gas Spring Gp 

  1. Replace the gas spring group with the same part number if the tilt steering column is not holding position or drifting.

Information System:

316F Excavator Machine System Specifications Pilot Valve - Stick
300.9D VPS Mini Hydraulic Excavator Machine Systems Travel System
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Electrical Output Components
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft - Remove
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Electronic Control Module (ECM) - ECM Locations
300.9D VPS Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge)
Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Electrical Input Components
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Location of Electrical Components
320GC, 320 and 323 Excavators Machine Systems Duo-Cone Conventional Seals - Install
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Features
Installation Procedure for the <NOBR>451-7490</NOBR> Pump Lines Gp On Certain Hydraulic Excavators {5057}
Improved Hose Routing on MP Bucket For 434 and 444 E and F Series Backhoe Loaders {5057}
316F Excavator Machine System Specifications Hydraulic Tank and Filter
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Boom Drift Reduction Valve
Installation Procedure for the 467-4407 Front Lines Gp On Certain Hydraulic Excavators {5057}
312F and 313F Excavator Machine Systems Pump Control (Negative Flow) - Test
325F Excavator Machine Systems Drift Reduction Valve (Boom) - Disassemble
325F Excavator Machine Systems Drift Reduction Valve (Boom) - Assemble
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Swing Hydraulic System
325F Excavator Machine Systems Boom Cylinder - Remove and Install
312F and 313F Excavator Machine Systems Gear Pump (Pilot) - Test
312F and 313F Excavator Machine Systems Specifications
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft - Install