Improved Expansion Tank Lines Are Now Used on Certain 568 Forest Machines {1354, 1377}
[M0066074]
COOLING SYSTEM
RADIATOR GP
Improved Expansion Tank Lines Are Now Used on Certain 568 Forest Machines {1354, 1377}
- Forest Machine
- 568 (S/N: BRB1-UP; YJX1-UP)
Description Of Change: Improved expansion tank lines are now used on the machines listed above. The improved expansion tank line results in less air in the radiator, which provides extended service life.
Adaptable To: Improved lines are adaptable to machines and effective in production with machines that are listed in Table 1.
Show/hide table
| Sales Model | Adaptable to Machines | Effective in Production with Machines |
|---|---|---|
| 568 | S/N:YJX1-136 | S/N:YJX137-UP |
| 568 LL | S/N:BRB1-380 | S/N:BRB381-UP |
Use the following rework procedure to update the adaptable machines that are listed above with the improved expansion tank line:
Rework Procedure
Show/hide table
| Required Parts List | |||
|---|---|---|---|
| Item | Quantity | Part Number | Part Name |
| 1 | 2 | 297-7964 | Connector |
| 2 | 3 | 3J-1907 | O-Ring Seal |
| 3 | 2 | 5D-1026 | Band Clamp |
| 4 | 1 | 5P-8885 | Adapter |
| 5 | 2 | 7K-1181 | Cable Strap |
| 6 | 1 | 8W-0222 | Adapter |
- Prepare vent line running from the thermostat housing to the expansion tank.
Show/hide table
Illustration 3 g06014264 (3) 5D-1026 Band Clamp
(5) 7K-1181 Cable Strap - Splice parts into vent line.
Use (3) clamps to secure fittings and adaptors to vent line. Use (5) straps to secure splice.
Show/hide table
| |
| Illustration 1 | g06014248 |
|
Part layout (1) 297-7964 Connector (2) 3J-1907 O-Ring Seal (4) 5P-8885 Adapter (6) 8W-0222 Adapter | |
Show/hide table
| |
| Illustration 2 | g06014255 |
|
Splice location in vent line | |
Information System:
308E2 CR and 308E2 SR Mini Hydraulic Excavators
Boom and Stick Linkage - Lubricate
312F and 313F Excavator Machine Systems
Main Pump (Flow) - Test - Hydraulic Power
Installing The 470-5247 Dual Tilt Kit on 415F2 Industrial Loaders {5104}
312F and 313F Excavator Machine Systems
Cylinder Speed - Check
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Loaded Bucket
312F and 313F Excavator Machine Systems
Swing Speed and Swing Drift on a Slope - Check
312F and 313F Excavator Machine Systems
Swing Speed and Overswing on Level Ground - Check
323F SA and 323F LN Excavator
Plate Locations and Film Locations
312F and 313F Excavator Machine Systems
Automatic Travel Speed Control - Test
312F and 313F Excavator Machine Systems
Travel on Level Ground - Test - Optional Test
312F and 313F Excavator Machine Systems
Travel on Level Ground - Test
415F2 IL Backhoe Loader Axles, Differentials and Brakes
Service Brake Control - Adjust
Cat<SUP>®</SUP> Electronic Technician (ET) Version 2015C or Higher is Required When Installing Engine Software on a Blank Engine ECM for a C3.4B Machine Engine {7610, 7620}
314F and 315F Excavators
Safety Messages
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display
Service Menu
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display
Diagnostic Capabilities
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display
Determining Diagnostic Trouble Codes
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display
Diagnostic Trouble Codes
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display
Event Codes
Software Updates for Certain Tier 4 Final Machines {1920, 7620}
312F and 313F Excavator Machine Systems
Machine System
Procedure for the Installing the <NOBR>479-2095</NOBR> Migration Kit on 316E and 318E Excavators {1000, 7000}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Sensor Signal (PWM) - Test