|Tool||Part Number||Part Description||QTY|
|A||311-1362||Vacuum Gauge Gp||1|
- Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
- Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply
276 to 414 kPa (40 to 60 psi)of air. This procedure will pull vacuum on the hydraulic system. Illustration 2 g02142350
- Disconnect hose assemblies (1) from control valve (3).
- Remove bolts (2) and control valve (3).
- Install control valve (3) in the reverse order of removal.