Ripper Tooth - Remove and Install
`
P315, P325, P335 and P360 Hydraulic Crushers
[KENR7943]
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
P315, P325, P335 and P360 Hydraulic Crushers
Crusher Tooth - Remove and Install
P315, P325, P335 and P360 Hydraulic Crushers
Cutting Edge - Remove and Install
P315, P325, P335 and P360 Hydraulic Crushers
Ripper Tooth - Remove and Install
P315, P325, P335 and P360 Hydraulic Crushers
Ripper Tooth - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 200-2959 (1) | Shear Lock Gp | 1 |
| A | 200-2960 (2) | Shear Lock Gp | 1 |
| A | 200-2885 (3) | Shear Lock Gp | 1 |
Show/hide table
| ( 1 ) | For use with P315 |
| ( 2 ) | For use with P325 |
| ( 3 ) | For use with P335 |
- Position the work tool on suitable cribbing that is on a hard, level surface.
- Use the host machine's hydraulic system to open the jaw.
- Attach Tooling (A) to cover assembly (1) behind guide block (2) in order to secure the jaw open.
Show/hide table
 | |
| Illustration 1 | g02023110 |
- Remove tooth (3) from the jaw.
Show/hide table
 | |
| Illustration 2 | g02141033 |
Installation Procedure
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new AVSpare parts for replacement.
- Install tooth (3) in the reverse order as the removal.
Information System:
P315, P325, P335 and P360 Hydraulic Crushers
Ripper Tooth - Remove and Install
349F and 352F Excavators Hydraulic System
Cylinder Speed - Check
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Remove and Install
420E and 430E Backhoe Loaders
Monitoring System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Swivel - Remove and Install
2010/04/02
A New Diverter Valve Has Been Designed for the Motor Grader Hydraulic Lift Cylinder Groups {6050, 6159, 6701}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Remove and Install
349F and 352F Excavators Hydraulic System
Cylinder Drift - Check - Empty Bucket
349F and 352F Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
374D Excavator
Cooling System Coolant Level - Check
2010/11/22
New Connecting Rod for the C6.6 Engine {1225}
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Boom - 10.67 m (35.007 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 7.12 m (23.360 ft)
349F and 352F Excavators Hydraulic System
Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
349E Excavator Machine System Specifications
Travel Motor
349F and 352F Excavators Hydraulic System
Solenoid Valve (Proportional Reducing) - Calibrate - Power Shift Pressure
C15 and C18 Engines for Caterpillar Built Machines
Disconnecting Snap To Connect Fittings
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Boom - 9.00 m (29.5 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 6.00 m (19.7 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Bucket Linkage
349E Excavator Hydraulic System
Solenoid Valve (Proportional Reducing) - Calibrate - Boom Down Regeneration
Know Your Cooling System{0708, 1000, 1350, 7000}
Improvements on the Hydraulic Cylinder for the Log Fork{5807}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Control Valve (Quick Coupler) - Remove and Install