Solenoid Valve (Two-Way Flow and One Pump/Two Pump) - Remove and Install
`
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
[KENR8157]
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Control Manifold (Pilot Oil) - Remove and Install - Hydraulic Lockout, Swing Brake, Travel
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Solenoid Valve (Auxiliary Circuit) - Remove and Install - Tool Relief
HYDRAULIC SYSTEM
VALVE GP-SOLENOID
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Cushion Valve - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Cushion Valve - Remove and Install - Fine Swing
349F and 352F Excavators Machine Systems
Shuttle Valve - Remove and Install - Straight Travel
349F and 352F Excavators Machine Systems
Shuttle Valve - Remove and Install - Pilot Oil
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Solenoid Valve (Auxiliary Circuit) - Remove and Install - Tool Relief
349F and 352F Excavators Machine Systems
Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Assemble
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | QTY |
A | 311-1362 | Vacuum Gauge Gp | 1 |
Start By:
- Release the hydraulic system pressure.
- Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply
276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.Show/hide tableIllustration 2 g02138635 - Disconnect hose assemblies (1) and harness assemblies (2).
- Remove bolts (3) and solenoid valve (4).
Show/hide table
Illustration 3 g02138716 - Remove bolts (5) and solenoid valve (6).
Show/hide table
![]() | |
Illustration 1 | g02138737 |
- Install solenoid valve (4) in the reverse order of removal.
- Tighten bolts (5) to a torque of
7 ± 1 N·m (62 ± 9 lb in) .
- Tighten bolts (5) to a torque of
Information System:
2010/06/30
An Improved Pipe Assembly in the Front Lines Group (ONE-WAY FLOW) is Now Used on Certain 365C L Excavators {5057}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Control Manifold (Pilot Oil) - Remove and Install - Hydraulic Lockout, Swing Brake, Travel
349F and 352F Excavators Machine Systems
Control Manifold (Pilot Oil) - Assemble - Hydraulic Lockout, Swing Brake, Travel with Aluminium Valve Body
349F and 352F Excavators Machine Systems
Control Manifold (Pilot Oil) - Disassemble - Hydraulic Lockout, Swing Brake, Travel with Aluminium Valve Body
349F and 352F Excavators Machine Systems
Control Manifold (Pilot Oil) - Assemble - Hydraulic Lockout, Swing Brake, Travel with a Steel Valve Body
349F and 352F Excavators Machine Systems
Control Manifold (Pilot Oil) - Disassemble - Hydraulic Lockout, Swing Brake, Travel with a Steel Valve Body
349F and 352F Excavators Hydraulic System
Engine Performance - Test - Engine Speed
349E Excavator Hydraulic System
Operational Checks
416E, 420E and 430E Backhoe Loaders
MID 053 - CID 2652 - FMI 06
416E, 420E and 430E Backhoe Loaders
MID 053 - CID 2652 - FMI 05
416E, 420E and 430E Backhoe Loaders
MID 053 - CID 2403 - FMI 13
416E, 420E and 430E Backhoe Loaders
MID 053 - CID 2403 - FMI 09
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
System Operation
349F and 352F Excavators Hydraulic System
Travel on Level Ground - Test
2010/03/29
New Track Bolts are Used to Improve Retention of the Track Shoes on Certain Excavators {4170}
349E Excavator Hydraulic System
Pilot Hydraulic System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Solenoid Valve (Auxiliary Circuit) - Remove and Install - Tool Relief
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Radiator - Remove and Install
2010/04/07
Improved Mechanical Valve on Certain 450E Backhoe Loaders {5051}
374D Excavator
Cooling System Coolant Extender (ELC) - Add
P315, P325, P335 and P360 Hydraulic Crushers
Crusher Jaw - Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Hood - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Fuel Lines
C6.6 Industrial Engine
Fuel Injection