Engine Oil Cooler - Remove and Install
`
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
[KENR8156]
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Engine Oil Filter Base - Remove and Install - Remote
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Hydraulic Oil Cooler - Remove and Install
COOLING SYSTEM
COOLER GP
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Engine Oil Cooler - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Loctite 242 | - |
- Remove two bolts (5).
- Remove bolts (1) and plate assembly (2).
- Remove bolts (4) and plate assembly (3).
Show/hide table
Illustration 2 g02130360 Show/hide table
Illustration 3 g02130385 - Disconnect hose assemblies (7) and (8).
- Remove tube assembly (10).
- Remove bolts (9), oil filter base (6), gasket (13), oil cooler (12), and gasket (11).
Show/hide table
Illustration 4 g02130389 Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (14), spring (15), and check valve (16).
Show/hide table
| |
| Illustration 1 | g02177953 |
- Install engine oil cooler (12) in the reverse order of removal.
- Tightening bolts (9) in numerical sequence. Retorque bolts (9) in numerical sequence to ensure that bolts (9) are properly torqued.
- Apply Tooling (A) to the threads of bolts (1), (4), and (5).
Show/hide table
Illustration 5 g02130410
Information System:
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinder
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Engine Oil Filter Base - Remove and Install - Remote
2010/04/15
The Center-Lock Hydraulic Pin Grabber Quick Couplers Have Specific Hydraulic Requirements {6129}
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold - Remove and Install - For Series Turbocharger Applications
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
Operation
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
Declaration of Conformity
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
Declaration of Conformity
The Location of the Brackets on the Air Intake Tube Assembly Has Been Corrected on Certain Excavators{1071}
MP15, MP20, MP30 and MP40 Multi-Processors
Swivel Leakage - Test
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
Work Tool Installation and Removal
MP15, MP20, MP30 and MP40 Multi-Processors
Swivel Leakage - Test
MP15, MP20, MP30 and MP40 Multi-Processors
Hydraulic Rotator Cycle Time - Check
C13, C15, and C18 Tier 4 Interim Engines
ARD Fuel Pressure Is High
C13, C15, and C18 Tier 4 Interim Engines
ARD Fuel Pressure Is Low
2010/06/08
The Starting Procedure is Revised for Certain Excavators and Mobile Hydraulic Power Units {1453}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Disassemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Assemble
2010/03/24
Improvements Have Been Made to Bulk Hose for Certain Caterpillar Products {5057}
349E Excavator Hydraulic System
Relief Valve (Main)
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
Specifications
349E Excavator Hydraulic System
Solenoid Valve (Proportional Reducing) - Power Shift System
C9.3 Tier 4 Final Engines
Electric Starting System - Test
2010/03/29
Procedure to Disengage the Cable Assembly Prior to Removing the Front Window on Certain Excavators {7310}
C15 and C18 Engines for Caterpillar Built Machines
Fuel Pressure Regulator - Remove and Install