336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine Oil Filter Base - Remove and Install - Remote Caterpillar

Removal Procedure

Show/hide table

Illustration 1	g02129980

1. Disconnect hose assemblies (1).
   Show/hide table

   Illustration 2	g02130013

2. Use Tooling (A) to remove filter (4).

3. Remove bolts (2) and engine oil filter base (3).
   Show/hide table

   Illustration 3	g02177908

   Show/hide table

   Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

4. Remove plug (8), O-ring seal (7), spring (6), and plunger (5).

5. If necessary, remove stud (9).

Installation Procedure

1. Install engine oil filter base (3) in the reverse order of removal.

   1. Apply Tooling (B) to the threads of stud (9). Apply Tooling (B) to a length of 20.0 ± 0.8 mm (0.79 ± 0.03 inch) on stud (9). Tighten stud (9) to a torque of 68 ± 7 N·m (50 ± 5 lb ft).

   2. Tighten bolts (2) to a torque of 30 ± 7 N·m (22 ± 5 lb ft).