336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Clean Emissions Module - Remove and Install - Clean Emissions Module Caterpillar


Clean Emissions Module - Remove and Install - Clean Emissions Module
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove exhaust elbow.


    Illustration 1g02178441

  1. Disconnect harness assembly (1) from the soot sensor.

  2. Disconnect hose (2).


    Illustration 2g02126592

  3. Disconnect harness assembly (3) from the soot sensor.

  4. Disconnect harness assembly (4).

  5. Disconnect hose assemblies (7) and hose assembly (5).

  6. Disconnect clip (6).


    Illustration 3g02126604

  7. Open the right rear access door.

  8. Remove bolts (8).


    Illustration 4g02126614

  9. Use a suitable lifting device to remove clean emissions module (9). The weight of clean emissions module (9) is approximately 160 kg (353 lb).

  10. Remove clean emissions module (9).

Installation Procedure

  1. Install clean emissions module (9) in the reverse order of removal.

Information System:

MP15, MP20, MP30 and MP40 Multi-Processors Swivel
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Exhaust Elbow - Remove and Install - Clean Emissions Module
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Recoil Spring - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Recoil Spring - Disassemble
2010/03/12 A Bracket and Hardware have been Added to the Oil Cooler Inlet Line on the 303.5C CR and 303C CR Mini Hydraulic Excavators {5057}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install - For Series Turbocharger Applications
349E Excavator Hydraulic System Negative Flow Control System
2010/09/13 A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Fuel Filter and Base - Remove and Install - Secondary
374D Excavator Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
Installation Procedure for 237-5928 Stick Lines Group {0679, 6501}
308D CR Excavator Machine Systems Swing Drive - Install
Proper Maintenance of the Cooling Systems of Certain Commercial Marine Engines With Keel Cooling {1350, 1395}
330C Excavator Machine Systems Recoil Spring - Disassemble
330C Excavator Machine Systems Recoil Spring - Assemble
2010/03/22 New AccuGrade Software is Now Available {7220, 7620}
MP15, MP20, MP30 and MP40 Multi-Processors Speed Control Valve
374D Excavator Safety Messages
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Fumes Disposal Filter - Remove and Install - Element and Breather Group
C13, C15, and C18 Tier 4 Interim Engines Soot Sensor - Test
MP15, MP20, MP30 and MP40 Multi-Processors Speed Control Valve
349E Excavator Hydraulic System Relief Valve (Main) - Heavy Lift
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Remove
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Install