Pilot Valve (Implement) - Install
`
315C Excavator Machine Systems
[RENR5525]
315C Excavator Machine Systems
Pilot Valve (Implement) - Disassemble
315C Excavator Machine Systems
Pilot Valve (Implement) - Assemble
HYDRAULIC SYSTEM
VALVE GP-PILOT
315C Excavator Machine Systems
Pilot Valve (Joystick) - Remove
315C Excavator Machine Systems
Pilot Valve (Joystick) - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Pilot Valve (Joystick) - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Pilot Valve (Joystick) - Assemble
315C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Remove
315C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Install
315C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Disassemble
1.1. Installation Procedure
Note: Check the O-ring seals and rubber components for wear or for damage. Replace the components, if necessary.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Place the implement pilot valve and pedal assembly (9) in position in the cab.
- Install bolts (10).
Show/hide table
Illustration 2 g00805535 - Install the fittings to the implement pilot valve in the original positions.
- Install switch (6) to the implement pilot valve. Connect harness assembly (7). Install the harness assembly and the wiring clip with bolt (8).
Show/hide table
Illustration 3 g00805533 - Connect hose assemblies (5), (3), (2), and (1) to implement pilot valve (4).
Show/hide table
| |
| Illustration 1 | g00805536 |
Information System:
315C Excavator Machine Systems
Pilot Valve (Implement) - Disassemble
315C Excavator Machine Systems
Pilot Valve (Implement) - Remove
315C Excavator Machine Systems
Undercarriage Frame - Install
315C Excavator Machine Systems
Track Carrier Roller - Install
315C Excavator Machine Systems
Shuttle Valve - Install - Straight Travel
315C Excavator Machine Systems
Undercarriage Frame - Remove
315C Excavator Machine Systems
Shuttle Valve - Remove - Straight Travel
315C Excavator Machine Systems
Swing Drive - Install
315C Excavator Machine Systems
Swing Drive - Remove
315C Excavator Machine Systems
Shuttle Valve - Remove - Auxiliary Control
W345B Series II Material Handler Machine System Specifications
Swing Drive - Left Swing Drive and Right Swing Drive
315C Excavator Machine Systems
Pump Control - Install
315C Excavator Machine Systems
Pilot Valve (Implement) - Assemble
315C Excavator Machine Systems
Shuttle Valve - Install - Auxiliary Control
315C Excavator Machine Systems
Pilot Valve (Travel) - Remove
315C Excavator Machine Systems
Pilot Valve (Travel) - Install
315C Excavator Machine Systems
Bucket Linkage Bearings and Seals - Remove
315C Excavator Machine Systems
Bucket Linkage Bearings and Seals - Install
315C Excavator Machine Systems
Stick Bearings and Seals - Remove
315C Excavator Machine Systems
Stick Bearings and Seals - Install
320C, 322C and 325C Excavators Tool Control System
Implement Electronic Control Module (Tool)
5130B Excavator
Hydraulic Oil Tank Filters - Replace
5230B Excavator Hydraulic System
Piston Pump (Implement)
H140CS and H160CS Hydraulic Hammers
Hydraulic Hammer Troubleshooting