EPC Parts Catalogs

315C Excavator Machine Systems Cab - Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #46686
Cab - Install
`
315C Excavator Machine Systems [RENR5525]
315C Excavator Machine Systems Track - Connect
315C Excavator Machine Systems Track Roller - Remove
OPERATOR STATION
CAB GP
315C Excavator Machine Systems Cab - Remove
315C Excavator Machine Systems Cab - Install
1.1. Installation Procedure

Installation Procedure

Show/hide table
Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
A  138-7574  Link Bracket  4 
    Show/hide table
    Illustration 1g00804281

  1. Attach Tooling (A) and a suitable lifting device to cab (18).
    Show/hide table
    Illustration 2g00705807
    Show/hide table
    Illustration 3g01001389

  2. Position cab (18) on the platform. The weight of cab (18) is approximately 295 kg (650 lb). Install bolts (20).
    Show/hide table
    Illustration 4g00705815

  3. Position lower window wiper (19) on the window.
    Show/hide table
    Illustration 5g00705637

  4. Connect washer fluid hose (17).
    Show/hide table
    Illustration 6g01001960

  5. Connect harness assemblies (16).
    Show/hide table
    Illustration 7g00704658

  6. Connect harness assemblies (15).
    Show/hide table
    Illustration 8g00704654

  7. Install air duct (14).
    Show/hide table
    Illustration 9g00704652

  8. Install air duct (13).
    Show/hide table
    Illustration 10g01001957

  9. Install screws (12).
    Show/hide table
    Illustration 11g01001955

  10. Install upper air duct (11) and screws (10).
    Show/hide table
    Illustration 12g00699443

  11. Install cover (8), the washers, plastic screws (7), and screws (9).
    Show/hide table
    Illustration 13g00704641

  12. Install storage box (6) on the left side of the cab.
    Show/hide table
    Illustration 14g00704635

  13. Install cover (4) and screws (5).
    Show/hide table
    Illustration 15g00704633

  14. Install floormat (3).
    Show/hide table
    Illustration 16g00704628

  15. Install strip (1) and screws (2).

End By:

  1. Install the storage box in the cab. Refer to Disassembly and Assembly, "Storage Box and Covers (Cab) - Remove and Install".

Information System:

315C Excavator Machine Systems Track - Connect
315C Excavator Machine Systems Cab - Remove
315C Excavator Machine Systems Hydraulic Tank and Filter - Install
315C Excavator Machine Systems Track - Separate
315C Excavator Machine Systems Counterweight - Remove and Install
315C Excavator Machine Systems Solenoid Valve (Two-Way Flow and One Pump/Two Pump) - Install
315C Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Install
315C Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
330C Forest Machine Hydraulic System Cylinder (Boom, Stick and Heel)
320C and 322C Forest Machines Hydraulic System Heel Hydraulic System
5130B Excavator Fuel System Primary Filter - Clean/Replace
320C and 322C Forest Machines Hydraulic System Negative Flow Control System
315C Excavator Machine Systems Track Roller - Remove
5130B Excavator Fuel System Secondary Filter - Replace
320C, 322C and 325C Excavators Tool Control System MID 069 - CID 1590 - FMI 06
315C Excavator Machine Systems Pressure Reducing Valve - Remove and Install
5130B Excavator Fuel System - Prime
120H and 135H Motor Graders Engine Air Filter Primary Element - Clean/Replace
320C, 322C and 325C Excavators Tool Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Governor Actuator - Calibrate
5230B Excavator Reference Material
5130B Excavator Fuel Tank Water and Sediment - Drain
5130B Excavator Fuses - Replace
315C Excavator Machine Systems Main Control Valve - Install