| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| ZZ | 6V-9509 | Face Seal Plug | 4 |
| 6V-9830 | Cap As | 4 | |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR IN THE INSTALLATION. THIS INFORMATION IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Note: The hydraulic oil must be contained in the proper manner. Refer to Special Publication, NENG7004, "Contamination Control Catalog".
Note: Put identification marks on all hoses, on all wires, and on all tubes for installation purposes. Plug all hoses, and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
 |
|
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Disconnect hose assemblies (1).
Show/hide table
Illustration 2 g00804020 - Remove fittings (2) from the valve.
Show/hide table
Illustration 3 g01021299 - Remove bolts (4) and pedal (3).
Show/hide table
Illustration 4 g00804032 - Remove bolts (5).
Show/hide table
Illustration 5 g00804079 - Remove auxiliary pilot valve (6).
| |
| Illustration 1 | g00804015 |
