Control Valve (Shift) - Disassemble
`
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems
[UENR0144]
1.1. Disassembly Procedure
Start By:
- Remove the control valve (shift). Refer to Disassembly and Assembly, "Control Valve (Shift) - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove nut (3) and coil (2) from valve body (1).
Show/hide table
Illustration 2 g00803397 - Remove valve cartridge (4) from valve body (1).
Show/hide table
Illustration 3 g00803398 - Remove O-ring seals (5) and backup ring (6) from valve cartridge (4).
Show/hide table
| |
| Illustration 1 | g00803396 |
Information System:
Procedure to Install 189-8642 Water Spray Kit for Dust Control on PC6 and PC9 Cold Planers{5612}
320C and 322C Forest Machines Hydraulic System
Main Hydraulic System
5230B Excavator Automatic Lubrication System
Lubrication Injector Banks - Adjust
315C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Install - NFC Limit Valve
315C Excavator Machine Systems
Main Hydraulic Pump - Remove
2001/06/18
Special Instruction, SEHS9098-01, May 2001, "Installation Instructions for the 174-1508 Electric Motor is Now Available" {5927}
315C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Remove - NFC Limit Valve
315C Excavator Machine Systems
Fuel Tank - Install
Installation Instructions for Jacket Water Heaters with Seal Kits{1383}
322C Forest Machine Hydraulic System
Relief Valve (Crossover) - Test and Adjust
322C Forest Machine Hydraulic System
Travel Motor - Test - Measurement of Case Drain Oil
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Travel Counterbalance Valve
322C Forest Machine Machine System Specifications
Boom - Log Loader
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 03
5130B Excavator
Engine Air Filter Primary Element - Clean/Replace
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems
Control Valve (Shift) - Assemble
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 05
312C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Disassemble - NFC Limit Valve
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Boom
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 05
5130B Excavator
Engine Air Filter Secondary Element - Replace
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 06
312C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Assemble - NFC Limit Valve
5130B Excavator
Engine Air Precleaner - Clean