Turbocharger - Remove and Install
`
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
[UENR7319]
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Electronic Unit Injector - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Cooler - Remove and Install
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Turbocharger - Remove and Install
306 and 306.5 Mini Hydraulic Excavator Engine Supplement
Turbocharger - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Drain the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove intake hose (1).
- Remove muffler flange (4).
- Disconnect intake hose (3).
Show/hide table
Illustration 2 g06044524 - Remove screw (5).
- Remove return pipe (crankcase side) (6).
- Remove turbocharger (2).
Show/hide table
| |
| Illustration 1 | g06044516 |
- Install turbocharger (2) in the reverse order of removal.
Information System:
320D2 GC Excavator Machine Systems
Bucket Linkage Bearings and Seals - Remove and Install
314D CR Hydraulic Excavator Machine Systems
Recoil Spring - Assemble
320D2 GC Excavator Machine Systems
Bucket Linkage - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Electronic Unit Injector - Remove and Install
320D2 GC Excavator Machine Systems
Bucket - Remove and Install
320D2 GC Excavator Machine Systems
Duo-Cone Conventional Seals - Install
320D2 GC Excavator Machine System Specifications
Swing Gear and Bearing
307E2 Mini Hydraulic Excavator Machine Systems
Hydraulic Lockout Control - Remove and Install
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System
Return Hydraulic System
320D2 GC Excavator Machine System Specifications
Upper Frame
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Fuel Manifold (Rail) - Remove and Install
320D2 GC Excavator Machine System Specifications
Muffler
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Cooler - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Pump - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Flywheel - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Cylinder Head - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Glow Plugs - Remove and Install
312F and 313F Excavator Machine Systems
Electronic Control (Pilot System)
312F and 313F Excavator Machine Systems
Electronic Control (Main Pump System)
318F Excavator Machine Systems
Stick - 2.25 m (7.381 ft)
312F and 313F Excavator Machine System Specifications
Fuel Tank
312F and 313F Excavator Machine System Specifications
Swing Gear and Bearing
318F Excavator Machine Systems
Stick - 3.1 m (10.17 ft)
312F and 313F Excavator Machine System Specifications
Swing Drive Mounting