Water Temperature Regulator - Remove and Install
`
320D2 GC Excavator Engine Supplement
[M0066450]
320D2 GC Excavator Engine Supplement
Muffler - Remove and Install
320D2 GC Excavator Engine Supplement
Engine - Remove and Install
COOLING SYSTEM
LINES GP-WATER
320D2 GC Excavator Engine Supplement
Water Temperature Regulator - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
 |
|
Cooling system coolant additive contains alkali. To help prevent personal injury, avoid contact with the skin and the eyes. Do not drink cooling system coolant additive. |
Show/hide table
|
|
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. |
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining procedures.
Show/hide table
Illustration 1 g03507008 Show/hide table
Illustration 2 g03507009 - Open hood (1). Disconnect hose (2). Remove water temperature regulator (3).
Show/hide table
Illustration 3 g03507010 - Remove O-ring seal (4) and water temperature regulator (5).
- Install water temperature regulator (5) in the reverse order of removal.
Information System:
320D2 GC Excavator Engine Supplement
Muffler - Remove and Install
312F and 313F Excavator Machine Systems
Travel Motor - Test - Measurement of Case Drain Oil
312F and 313F Excavator Machine Systems
Relief Valve (Crossover) - Test and Adjust
A Stronger Secondary Air Filter Is Now Available For F and F2 Series Backhoe Loaders {1051, 1054}
325F Excavator Machine Systems
Boom Bearings - Remove and Install
312F and 313F Excavator Machine Systems
Relief Valve (Blade) - Test and Adjust - If Equipped
307E2 Mini Hydraulic Excavator Machine Systems
Heating and Air Conditioning Unit - Install
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
320D2 GC Excavator Engine Supplement
Hood - Remove and Install
320D2 GC Excavator Engine Supplement
Receiver Dryer (Refrigerant) - Remove and Install
A Heavy-Duty Bucket GP is Available For Certain Backhoe Loaders {6503}
312F and 313F Excavator Machine System Specifications
Hydraulic Oil Lines
316F Excavator Machine System Specifications
Air Conditioner Lines
320D2 GC Excavator Machine System Specifications
Muffler
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Fuel Manifold (Rail) - Remove and Install
320D2 GC Excavator Machine System Specifications
Upper Frame
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System
Return Hydraulic System
307E2 Mini Hydraulic Excavator Machine Systems
Hydraulic Lockout Control - Remove and Install
320D2 GC Excavator Machine System Specifications
Swing Gear and Bearing
320D2 GC Excavator Machine Systems
Duo-Cone Conventional Seals - Install
320D2 GC Excavator Machine Systems
Bucket - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Electronic Unit Injector - Remove and Install