320D2 GC Excavator Engine Supplement Hood - Remove and Install Caterpillar


Hood - Remove and Install
`
320D2 GC Excavator Engine Supplement [M0066450]
FRAME AND BODY
HOOD GP
320D2 GC Excavator Engine Supplement Hood - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure



    Illustration 1g01315809

  1. Attach a suitable lifting device to hood (1). The weight of hood (1) is approximately 56 kg (125 lb).


    Illustration 2g01315811


    Illustration 3g01315812

  2. Open engine hood (1). Remove pin (3) r to disconnect brace (2). Secure brace (2) to hood (1), as shown. Use the suitable lifting device to lower hood (1).


    Illustration 4g01315813


    Illustration 5g01315815

  3. Remove bolts (4). Remove hood (1).

Installation Procedure

  1. Install hood (1) in the reverse order of removal.

Information System:

320D2 GC Excavator Engine Supplement Receiver Dryer (Refrigerant) - Remove and Install
Repair Procedure for the Front Tooth Seat on Certain MP324 D and MP324 CC Jaw Sets {6349}
320D2 GC Excavator Engine Supplement Refrigerant Condenser - Remove and Install
320D2 GC Excavator Engine Supplement Refrigerant Compressor - Remove and Install
320D2 GC Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
318F Excavator Machine Systems Machine System
320D2 GC Excavator Engine Supplement Water Pump - Remove and Install
312F and 313F Excavator Machine Systems Relief Valve (Main) - Test and Adjust
320D2 GC Excavator Engine Supplement Air Cleaner - Remove and Install
320D2 GC Excavator Engine Supplement Fuel Priming Pump - Remove and Install
320D2 GC Excavator Engine Supplement Battery - Remove and Install
316F Excavator Machine System Specifications Fuel Tank and Mounting
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}
307E2 Mini Hydraulic Excavator Machine Systems Heating and Air Conditioning Unit - Install
312F and 313F Excavator Machine Systems Relief Valve (Blade) - Test and Adjust - If Equipped
325F Excavator Machine Systems Boom Bearings - Remove and Install
A Stronger Secondary Air Filter Is Now Available For F and F2 Series Backhoe Loaders {1051, 1054}
312F and 313F Excavator Machine Systems Relief Valve (Crossover) - Test and Adjust
312F and 313F Excavator Machine Systems Travel Motor - Test - Measurement of Case Drain Oil
320D2 GC Excavator Engine Supplement Muffler - Remove and Install
320D2 GC Excavator Engine Supplement Water Temperature Regulator - Remove and Install
A Heavy-Duty Bucket GP is Available For Certain Backhoe Loaders {6503}