EPC Parts Catalogs

320D2 GC Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #114295
Crankshaft Vibration Damper and Pulley - Remove and Install
`
320D2 GC Excavator Engine Supplement [M0066450]
320D2 GC Excavator Engine Supplement Water Pump - Remove and Install
320D2 GC Excavator Engine Supplement Refrigerant Compressor - Remove and Install
BASIC ENGINE
DAMPER GP
320D2 GC Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the fan.

  1. Remove the serpentine belt. Refer to Operation and Maintenance Manual, "Belt- Remove and Install".
    Show/hide table
    Illustration 1g01306599

  1. Remove plug (1). Use a suitable pin in order to ensure that the crankshaft does not rotate.
    Show/hide table
    Illustration 2g01306601

  2. Remove bolts (3) and damper (2).
    Show/hide table
    Illustration 3g01306602

  3. Remove bolts (5) and retainer (6). Remove the adapter and pulley (4) as a unit.
    Show/hide table
    Illustration 4g01306603

  4. Remove pulley (7) from adapter (8).

Installation Procedure

    Show/hide table
    Illustration 5g01306603

  1. Install adapter (8) to pulley (7).
    Show/hide table
    Illustration 6g01306602

  2. Install the adapter and pulley (4) as a unit. Install retainer (6) and bolts (5). Tighten bolts (5) to a torque of 200 N·m (148 lb ft).
    Show/hide table
    Illustration 7g01306601

  3. Install damper (2) and bolts (3). Tighten bolts (3) to a torque of 115 N·m (85 lb ft).
    Show/hide table
    Illustration 8g01306599

  4. Remove the suitable pin. Install plug (1). Install the serpentine belt. Refer to Operation and Maintenance Manual, "Belt- Remove and Install".

End By:

  1. Install the fan.

Information System:

318F Excavator Machine Systems Machine System
320D2 GC Excavator Engine Supplement Water Pump - Remove and Install
312F and 313F Excavator Machine Systems Relief Valve (Main) - Test and Adjust
320D2 GC Excavator Engine Supplement Air Cleaner - Remove and Install
320D2 GC Excavator Engine Supplement Fuel Priming Pump - Remove and Install
320D2 GC Excavator Engine Supplement Battery - Remove and Install
316F Excavator Machine System Specifications Fuel Tank and Mounting
Inspection of the Rear of the Engine on Certain C3.3, C4.4, and C7.1 Engines {1161, 1201}
312F and 313F Excavator Machine System Specifications Boom Cylinder Lines
318F Excavator Machine Systems Final Drive
312F and 313F Excavator Machine System Specifications Pump Head (Main)
312F and 313F Excavator Machine System Specifications Main Hydraulic Pump
320D2 GC Excavator Engine Supplement Refrigerant Compressor - Remove and Install
320D2 GC Excavator Engine Supplement Refrigerant Condenser - Remove and Install
Repair Procedure for the Front Tooth Seat on Certain MP324 D and MP324 CC Jaw Sets {6349}
320D2 GC Excavator Engine Supplement Receiver Dryer (Refrigerant) - Remove and Install
320D2 GC Excavator Engine Supplement Hood - Remove and Install
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}
307E2 Mini Hydraulic Excavator Machine Systems Heating and Air Conditioning Unit - Install
312F and 313F Excavator Machine Systems Relief Valve (Blade) - Test and Adjust - If Equipped
325F Excavator Machine Systems Boom Bearings - Remove and Install
A Stronger Secondary Air Filter Is Now Available For F and F2 Series Backhoe Loaders {1051, 1054}