Water Pump - Remove and Install
`
320D2 GC Excavator Engine Supplement
[M0066450]
320D2 GC Excavator Engine Supplement
Air Cleaner - Remove and Install
320D2 GC Excavator Engine Supplement
Crankshaft Vibration Damper and Pulley - Remove and Install
COOLING SYSTEM
PUMP GP-WATER
320D2 GC Excavator Engine Supplement
Water Pump - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Start By:
- Remove the fan.
- Remove bolts (1) and guard (2).
Show/hide table
Illustration 2 g01306964 - Disconnect hose (3).
Show/hide table
Illustration 3 g01307061 - Remove bolts (6), cover (8), and gasket (7). Remove bolts (9) and water pump (5). Remove gasket (4).
Show/hide table
| |
| Illustration 1 | g02795196 |
- Install gasket (4). Install water pump (5) and bolts (9). Install gasket (7), cover (8), and bolts (6). Tighten bolts (9) and bolts (6) in the sequence that is shown in Illustration 4 to a torque of
22 N·m (16 lb ft) .Show/hide table
Illustration 6 g01306964 - Connect hose (3).
Show/hide table
Illustration 7 g02795203 - Install guard (2). Install bolts (1).
Show/hide table
| |
| Illustration 4 | g01183807 |
Show/hide table
| |
| Illustration 5 | g01307061 |
End By:
- Install the fan.
Information System:
312F and 313F Excavator Machine Systems
Relief Valve (Main) - Test and Adjust
320D2 GC Excavator Engine Supplement
Air Cleaner - Remove and Install
320D2 GC Excavator Engine Supplement
Fuel Priming Pump - Remove and Install
320D2 GC Excavator Engine Supplement
Battery - Remove and Install
316F Excavator Machine System Specifications
Fuel Tank and Mounting
Inspection of the Rear of the Engine on Certain C3.3, C4.4, and C7.1 Engines {1161, 1201}
312F and 313F Excavator Machine System Specifications
Boom Cylinder Lines
318F Excavator Machine Systems
Final Drive
312F and 313F Excavator Machine System Specifications
Pump Head (Main)
312F and 313F Excavator Machine System Specifications
Main Hydraulic Pump
312F and 313F Excavator Machine Systems
Electronic Control (Machine System)
312F and 313F Excavator Machine Systems
Engine Control
318F Excavator Machine Systems
Machine System
320D2 GC Excavator Engine Supplement
Crankshaft Vibration Damper and Pulley - Remove and Install
320D2 GC Excavator Engine Supplement
Refrigerant Compressor - Remove and Install
320D2 GC Excavator Engine Supplement
Refrigerant Condenser - Remove and Install
Repair Procedure for the Front Tooth Seat on Certain MP324 D and MP324 CC Jaw Sets {6349}
320D2 GC Excavator Engine Supplement
Receiver Dryer (Refrigerant) - Remove and Install
320D2 GC Excavator Engine Supplement
Hood - Remove and Install
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}
307E2 Mini Hydraulic Excavator Machine Systems
Heating and Air Conditioning Unit - Install
312F and 313F Excavator Machine Systems
Relief Valve (Blade) - Test and Adjust - If Equipped