Air Cleaner - Remove and Install
`
320D2 GC Excavator Engine Supplement
[M0066450]
320D2 GC Excavator Engine Supplement
Fuel Priming Pump - Remove and Install
320D2 GC Excavator Engine Supplement
Water Pump - Remove and Install
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
320D2 GC Excavator Engine Supplement
Air Cleaner - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
- Open the left side access doors (1).
Show/hide table
Illustration 2 g01314754 - Remove cover (2).
Show/hide table
Illustration 3 g01314755 - Remove primary filter element (3).
Show/hide table
Illustration 4 g01314757 - Remove secondary filter element (4).
Show/hide table
Illustration 5 g01314759 - Disconnect harness assemblies (6). Disconnect hose (5).
Show/hide table
Illustration 6 g01314761 - Remove bolts (7) and air filter housing (8).
Show/hide table
| |
| Illustration 1 | g03296159 |
- Install air filter housing (8) in the reverse order of removal.
Information System:
320D2 GC Excavator Engine Supplement
Fuel Priming Pump - Remove and Install
320D2 GC Excavator Engine Supplement
Battery - Remove and Install
316F Excavator Machine System Specifications
Fuel Tank and Mounting
Inspection of the Rear of the Engine on Certain C3.3, C4.4, and C7.1 Engines {1161, 1201}
312F and 313F Excavator Machine System Specifications
Boom Cylinder Lines
318F Excavator Machine Systems
Final Drive
312F and 313F Excavator Machine System Specifications
Pump Head (Main)
312F and 313F Excavator Machine System Specifications
Main Hydraulic Pump
312F and 313F Excavator Machine Systems
Electronic Control (Machine System)
312F and 313F Excavator Machine Systems
Engine Control
300.9D VPS Mini Hydraulic Excavator Machine Systems
Compression - Test
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System
Oil Makeup (Swing System)
312F and 313F Excavator Machine Systems
Relief Valve (Main) - Test and Adjust
320D2 GC Excavator Engine Supplement
Water Pump - Remove and Install
318F Excavator Machine Systems
Machine System
320D2 GC Excavator Engine Supplement
Crankshaft Vibration Damper and Pulley - Remove and Install
320D2 GC Excavator Engine Supplement
Refrigerant Compressor - Remove and Install
320D2 GC Excavator Engine Supplement
Refrigerant Condenser - Remove and Install
Repair Procedure for the Front Tooth Seat on Certain MP324 D and MP324 CC Jaw Sets {6349}
320D2 GC Excavator Engine Supplement
Receiver Dryer (Refrigerant) - Remove and Install
320D2 GC Excavator Engine Supplement
Hood - Remove and Install
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}