320D2 GC Excavator Engine Supplement Fuel Priming Pump - Remove and Install Caterpillar


Fuel Priming Pump - Remove and Install
`
320D2 GC Excavator Engine Supplement [M0066450]
FUEL SYSTEM
LINES GP-FUEL
320D2 GC Excavator Engine Supplement Fuel Priming Pump - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

------ WARNING! ------

Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.

Turn the disconnect switch OFF when draining and/or removing any fuel system components.




    Illustration 1g03506508


    Illustration 2g03506509

  1. Open panel (1). Disconnect fuel lines (2). Remove water separator and fuel filter (3).


    Illustration 3g03506510

  2. Remove water separator and fuel filter base assembly (4).


    Illustration 4g03506511

  3. Remove sensor (5), O-ring seal (6), fitting (7) and O-ring seal (8).


    Illustration 5g03506528

  4. Remove plugs (9) and O-ring seals (10).


    Illustration 6g03506529

  5. Remove fitting (13) and fitting (12). Remove O-ring seals (11).


    Illustration 7g03506530

  6. Remove fitting (15) and O-ring seal (14).

Installation Procedure

  1. Install water separator and fuel filter base assembly (4) in the reverse order of removal.

Information System:

320D2 GC Excavator Engine Supplement Battery - Remove and Install
316F Excavator Machine System Specifications Fuel Tank and Mounting
Inspection of the Rear of the Engine on Certain C3.3, C4.4, and C7.1 Engines {1161, 1201}
312F and 313F Excavator Machine System Specifications Boom Cylinder Lines
318F Excavator Machine Systems Final Drive
312F and 313F Excavator Machine System Specifications Pump Head (Main)
312F and 313F Excavator Machine System Specifications Main Hydraulic Pump
312F and 313F Excavator Machine Systems Electronic Control (Machine System)
312F and 313F Excavator Machine Systems Engine Control
300.9D VPS Mini Hydraulic Excavator Machine Systems Compression - Test
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Makeup (Swing System)
325F Excavator Machine Systems Boom - Install
320D2 GC Excavator Engine Supplement Air Cleaner - Remove and Install
312F and 313F Excavator Machine Systems Relief Valve (Main) - Test and Adjust
320D2 GC Excavator Engine Supplement Water Pump - Remove and Install
318F Excavator Machine Systems Machine System
320D2 GC Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
320D2 GC Excavator Engine Supplement Refrigerant Compressor - Remove and Install
320D2 GC Excavator Engine Supplement Refrigerant Condenser - Remove and Install
Repair Procedure for the Front Tooth Seat on Certain MP324 D and MP324 CC Jaw Sets {6349}
320D2 GC Excavator Engine Supplement Receiver Dryer (Refrigerant) - Remove and Install
320D2 GC Excavator Engine Supplement Hood - Remove and Install
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}