320D2 GC Excavator Engine Supplement Battery - Remove and Install Caterpillar


Battery - Remove and Install
`
320D2 GC Excavator Engine Supplement [M0066450]
ELECTRICAL AND STARTING SYSTEM
BATTERY GP
320D2 GC Excavator Engine Supplement Battery - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

------ WARNING! ------

Personal injury may occur from failure to properly service the batteries.

Batteries give off flammable fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts the skin or eyes.

Prevent sparks near the batteries. Sparks could cause vapors to explode. Do not allow jumper cable ends to contact each other or the engine. Improper jumper cable connections can cause an explosion.

Always wear protective glasses when working with batteries.




    Illustration 1g01313885

  1. Open the left side access doors (1).

  2. Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".


    Illustration 2g01314739

  3. Remove nut (2). Remove covers (3) and (4).


    Illustration 3g01314741

  4. Disconnect cable assembly (7) and (8). Remove cable assembly (5). Remove batteries (6). Repeat for the other batteries.

Installation Procedure

  1. Install batteries (6) In the reverse order of removal.

Information System:

316F Excavator Machine System Specifications Fuel Tank and Mounting
Inspection of the Rear of the Engine on Certain C3.3, C4.4, and C7.1 Engines {1161, 1201}
312F and 313F Excavator Machine System Specifications Boom Cylinder Lines
318F Excavator Machine Systems Final Drive
312F and 313F Excavator Machine System Specifications Pump Head (Main)
312F and 313F Excavator Machine System Specifications Main Hydraulic Pump
312F and 313F Excavator Machine Systems Electronic Control (Machine System)
312F and 313F Excavator Machine Systems Engine Control
300.9D VPS Mini Hydraulic Excavator Machine Systems Compression - Test
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Makeup (Swing System)
325F Excavator Machine Systems Boom - Install
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
320D2 GC Excavator Engine Supplement Fuel Priming Pump - Remove and Install
320D2 GC Excavator Engine Supplement Air Cleaner - Remove and Install
312F and 313F Excavator Machine Systems Relief Valve (Main) - Test and Adjust
320D2 GC Excavator Engine Supplement Water Pump - Remove and Install
318F Excavator Machine Systems Machine System
320D2 GC Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
320D2 GC Excavator Engine Supplement Refrigerant Compressor - Remove and Install
320D2 GC Excavator Engine Supplement Refrigerant Condenser - Remove and Install
Repair Procedure for the Front Tooth Seat on Certain MP324 D and MP324 CC Jaw Sets {6349}
320D2 GC Excavator Engine Supplement Receiver Dryer (Refrigerant) - Remove and Install
320D2 GC Excavator Engine Supplement Hood - Remove and Install
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}