M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Hydraulic Tank and Filter - Remove and Install Caterpillar

Removal Procedure

Start By:

1. Remove the counterweight.

1. Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
   Show/hide table

   Illustration 1	g06010039

2. Remove bolts (1) and cover (2).
   Show/hide table

   Illustration 2	g06010041

3. Loosen clamp (5). Remove bolts (4) and channel assembly (3).
   Show/hide table

   Illustration 3	g06010049

4. Remove bolts (7) and cover assembly (6).
   Show/hide table

   Illustration 4	g06010086

5. Disconnect harness assembly (8). Cut the cable straps and reposition harness assembly (10) out of the way.

6. Remove bolts (9).
   Show/hide table

   Illustration 5	g06010134

7. Disconnect hose assemblies (11), (12), (13), and (14).
   Show/hide table

   Illustration 6	g06010148

8. Remove bolts (16) and reposition plate assembly (15) out of the way.
   Show/hide table

   Illustration 7	g06010170

9. Remove insulation (20).

10. Remove bolts (21) and (22).

11. Disconnect harness assembly (18). Reposition soot sensor assembly (19) out of the way.
    Show/hide table

    Illustration 8	g06010184

12. Cut cable straps (24) and disconnect harness assembly (23).
    Show/hide table

    Illustration 9	g06010352

13. Remove bolts (25) and (26).
    Show/hide table

    Illustration 10	g06010341

14. Cut cable straps (27).

15. Disconnect hose assemblies (28) and (29).
    Show/hide table

    Illustration 11	g06010346

16. Loosen clamp and disconnect tube (30).

17. Disconnect hose assemblies (31), (32), and (33).
    Show/hide table

    Illustration 12	g06010348

18. Cut cable straps (34), (35), and (36).

19. Disconnect harness assembly (37).
    Show/hide table

    Illustration 13	g06010358

20. Remove bolts (38) and (39).
    Show/hide table

    Illustration 14	g06010521

21. Remove bolts (40) and plate (41).
    Show/hide table

    Illustration 15	g06010544

22. Disconnect hose assemblies (42), (43), and (44).
    Show/hide table

    Illustration 16	g06010548

23. Disconnect hose assemblies (45), (46), and (47).
    Show/hide table

    Illustration 17	g06010622

    Show/hide table

    Illustration 18	g06010625

24. Attach Tooling (A) and a suitable lifting device to hydraulic tank and filter (48). The weight of hydraulic tank and filter (48) is approximately 157 kg (350 lb).

25. Remove bolts (49) and hydraulic tank and filter (48).

Installation Procedure

1. Install hydraulic tank and filter (48) in the reverse of removal.

   1. Install Tooling (B) on the threads of bolts (49).