C2.4 Tier 4 Final Engines for Caterpillar Built Machines Housing (Front) - Remove and Install Caterpillar


Housing (Front) - Remove and Install
`
C2.4 Tier 4 Final Engines for Caterpillar Built Machines [UENR7319]
BASIC ENGINE
HOUSING GP-FRONT
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tooling 
Tool  Part Number  Part Description  Qty 
—  Loctite Hi-Temp Flange Sealant  — 

Start By:

  1. Remove crankshaft pulley.

  2. Remove engine oil cooler.

  3. Remove camshaft position sensor.


    Illustration 1g06009327

  1. Remove clamp (1). Disconnect hose assembly (2).


    Illustration 2g06009342

  2. Remove nut (4) and lifting plate (3).

  3. Remove clamp (6) and disconnect hose assembly (5).


    Illustration 3g06009549

  4. Disconnect hose assembly (11) (not shown). Remove bolts (9) and elbow (10).

  5. Remove bolts (7), front housing (8), and the gasket.

Installation Procedure

  1. Install front housing (8) in the reverse order of removal.

    1. Apply Tooling (A) to the flange of front housing (8).

Information System:

M314F and M316F Wheeled Excavators Hydraulic System Margin Pressure - Test and Adjust
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
316F Excavator Machine Systems Electronic Control (Machine System)
Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Loaded Bucket
Installation of the <NOBR>467-4861</NOBR> Front Lines Gp on Certain Hydraulic Excavators {5057}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Linkage - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Seat - Assemble
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 06
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Fuel Tank - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 03
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
316F Excavator Machine Systems Electronic Control (Pilot System)
316F Excavator Machine Systems Electronic Control (Main Pump System)
316F Excavator Machine Systems Electronic Control (Boom System)
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
415 Industrial Loader Hydraulic and Steering System Lift Arm
336D2 and 340D2 Excavators Machine System Return Lines
336D2 and 340D2 Excavators Machine System Boom Cylinder Lines
336D2 and 340D2 Excavators Machine System Fuel Lines
307E2 Mini Hydraulic Excavator Machine Systems Heating and Air Conditioning Unit - Remove
320E and 323E Excavators Machine Electronic Control System MID 299, 1193-3
Procedure to Replace the Bracket Assembly of the Boom Nose on Heavy-Duty Booms for 313D2 LGP Excavators {6501}
336D2 and 340D2 Excavators Machine System Return Lines