Crankshaft Pulley - Remove and Install
`
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
[UENR7319]
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Fuel Injection Lines - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Housing (Front) - Remove and Install
BASIC ENGINE
CRANKSHAFT GP
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Crankshaft - Remove
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Crankshaft - Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
| Required Tooling | |||
| Tool | Part Number | Part Description | Qty |
| A | 488-1131 | Socket | 1 |
| B | 1U-6400 | Three Jaw Puller | 1 |
| C | — | Loctite ViperLube High Performance Synthetic Grease | — |
Start By:
- Remove the v-belt.
- Use Tooling (A) to remove nut (1)
Show/hide table
Illustration 2 g06009278 - Use Tooling (B) to remove crankshaft pulley (2).
Show/hide table
| |
| Illustration 1 | g06009260 |
- Install crankshaft pulley (2) in the reverse order of removal.
- Apply Tooling (C) to the splines of the crankshaft.
- Tighten nut (1) to a torque of
138 N·m to 156 N·m (102 lb ft to 115 lb ft) .
Information System:
316F Excavator Machine Systems
Electronic Control (Machine System)
Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000}
323F SA Excavator and 323F MHPU Machine Systems
Cylinder Drift - Check - Loaded Bucket
Installation of the <NOBR>467-4861</NOBR> Front Lines Gp on Certain Hydraulic Excavators {5057}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Blade Linkage - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems
Seat - Assemble
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0444 - FMI 06
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Fuel Tank - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0444 - FMI 03
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Backhoe Loaders {0372, 1000, 7000, 753T, 7565}
415F2 Backhoe Loaders Hydraulic and Steering System
Lines (Hydraulic)
M314F and M316F Wheeled Excavators Hydraulic System
Margin Pressure - Test and Adjust
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Housing (Front) - Remove and Install
316F Excavator Machine Systems
Electronic Control (Pilot System)
316F Excavator Machine Systems
Electronic Control (Main Pump System)
316F Excavator Machine Systems
Electronic Control (Boom System)
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
415 Industrial Loader Hydraulic and Steering System
Lift Arm
336D2 and 340D2 Excavators Machine System
Return Lines
336D2 and 340D2 Excavators Machine System
Boom Cylinder Lines
336D2 and 340D2 Excavators Machine System
Fuel Lines
307E2 Mini Hydraulic Excavator Machine Systems
Heating and Air Conditioning Unit - Remove
320E and 323E Excavators Machine Electronic Control System
MID 299, 1193-3