Note: The orientation of the right side of the machine is determined by the viewpoint of the operator while the operator is seated in the cab.
(1) Service connector
The service connector is located in the cab.
Harness Code Plug
(2) Harness code plug
The harness code plug is located in the cab riser below the VIMS ECM.
(3) Fuse panel
The fuse panel is located in the cab fuse box.
(4) Fuse panel
The fuse panel is located in the cab riser next to the relays.
Service Connector, VIMS Telemetry Port and VIMS Serial Port
(5) Service connector
(6) VIMS telemetry port
(7) VIMS serial port
The service connector and ports are located in the cab fuse box.
(8) Breaker (alternator)
(9) Breaker (main circuit)
(10) Breaker (engine ECM)
(11) Breaker (key switch)
The breakers are located in the cab riser.
(12) Breaker (air conditioning)
(13) Breaker (converter output)
The breakers are located in the cab fuse box.