M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Tool Select Menu Caterpillar

Note: If you only have a Hammer Valve, you can only select "NO TOOL" and "HAMMER".

Note: "NO TOOL"is the default setting.

• "NO TOOL"

Note: The "TOOL"options are only available if you have a combined function valve.

• "TOOL #1"

• "TOOL #2"

• "TOOL #3"

• "TOOL #4"

• "TOOL #5"

Note: "HAMMER" is only available if you have a hammer valve.

• "HAMMER"

Note: "GENERATOR" option is available only if you have a generator valve.

• "GENERATOR"

Press the OK key (8) in order to select a tool. Press the cancel key (7) in order to exit the menu. The tool that is active will have "ACTIVE" on the third line of the display.