5230B Excavator Electronic Systems Guide Location of Switches Caterpillar


Location of Switches
`
5230B Excavator Electronic Systems Guide [RENR3377]
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
5230B Excavator Electronic Systems Guide Location of Switches
1.1. Switch (Engine Coolant level)
2.1. Switch (Aftercooler Coolant Level)
3.1. Switch (Engine Oil Level)
4.1. Switch (Swing High Pressure Filter)
5.1. Switch (Implement High Pressure Filter 1) and Switch (Implement High Pressure Filter 2)
6.1. Switch (Implement High Pressure Filter 3)
7.1. Switch (Hydraulic Oil Level)
8.1. Switch (Implement Pressure)
9.1. Switch (Boom Raise Pilot Pressure)
10.1. Switch (Hydraulic Return Filter) and Switch (Case Drain Filter)
11.1. Switch (Boom Raise Pilot) and Switch (Boom Float Pressure)
12.1. Switch (Neutral Start)
13.1. Switch (Swing Drive Oil Level)
14.1. Switch (Implement Pump Inlet Shutoff 1) and Switch (Implement Pump Inlet Shutoff 2)
15.1. Switch (Engine Coolant Flow)
16.1. Switch (Fuel Filter Pressure)
17.1. Switch (Battery Disconnect)
18.1. Switch (Travel Pilot Pressure)
19.1. Switch (Air Dryer)
20.1. Switch (Engine Shutdown)

Note: Any reference to the right side or to the left side of the machine is made from the viewpoint of the operator seated in the cab.

Switch (Engine Coolant level)




Illustration 1g00855845

(1) Switch (engine coolant level)

The switch is located on the radiator.

Switch (Aftercooler Coolant Level)




Illustration 2g00855865

(2) Switch (aftercooler coolant level)

The switch is located on the radiator.

Switch (Engine Oil Level)




Illustration 3g00855884

(3) Switch (engine oil level)

The switch is located on the oil pan.

Switch (Swing High Pressure Filter)




Illustration 4g00855936

(4) Switch (swing high pressure filter)

The switch is in the pump drive compartment. The switch is located on the swing high pressure filter.

Switch (Implement High Pressure Filter 1) and Switch (Implement High Pressure Filter 2)




Illustration 5g00855941

(5) Switch (implement high pressure filter 1)

(6) Switch (implement high pressure filter 2)

The switches are in the pump drive compartment. The switch is located on the implement high pressure filter.

Switch (Implement High Pressure Filter 3)




Illustration 6g00855947

(7) Switch (implement high pressure filter 3)

The switch is in the pump drive compartment. The switch is located on the implement high pressure filter.

Switch (Hydraulic Oil Level)




Illustration 7g00855950

(8) Switch (hydraulic oil level)

The switch is located on the side of the hydraulic tank.

Switch (Implement Pressure)




Illustration 8g00855970

(9) Switch (implement pressure)

The switch is located on the front control valve.

Switch (Boom Raise Pilot Pressure)




Illustration 9g00855972

(10) Switch (boom raise pilot pressure)

The switch is located on the left hand side of the frame by the front control valve.

Switch (Hydraulic Return Filter) and Switch (Case Drain Filter)




Illustration 10g00856124

(11) Switch (hydraulic return filter)

(12) Switch (case drain filter)

The switches are located on the hydraulic tank.

Switch (Boom Raise Pilot) and Switch (Boom Float Pressure)




Illustration 11g00856132

(13) Switch (boom raise pilot)

(14) Switch (boom float pressure)

The switches are located in the cab riser on the ceiling.

Switch (Neutral Start)




Illustration 12g00856139

(15) Switch (neutral start)

The switch is located in the cab riser on the ceiling.

Switch (Swing Drive Oil Level)




Illustration 13g00856143

(16) Switch (swing drive oil level)

The switch is located on the swing drive oil tank under the cab access ladder.

Switch (Implement Pump Inlet Shutoff 1) and Switch (Implement Pump Inlet Shutoff 2)




Illustration 14g00856148

(17) Switch (implement pump inlet shutoff 1)

(18) Switch (implement pump inlet shutoff 2)

The switches are located on the hydraulic tank.

Switch (Engine Coolant Flow)




Illustration 15g00856188

(19) Switch (engine coolant flow)

The switch is located below the alternator.

Switch (Fuel Filter Pressure)




Illustration 16g00856194

(20) Switch (fuel filter pressure)

The switch is located on the fuel filter housing.

Switch (Battery Disconnect)




Illustration 17g00856199

(21) Switch (battery disconnect)

The switch is located next to the battery compartment at the right front corner of the engine.

Switch (Travel Pilot Pressure)




Illustration 18g00856202

(22) Switch (travel pilot pressure)

The switch is located next to the rear control valve.

Switch (Air Dryer)




Illustration 19g00856452

(23) Switch (air dryer)

The switch is located on the air dryer.

Switch (Engine Shutdown)




Illustration 20g00857053

(24) Switch (engine shutdown)

The switch is located on the frame assembly beside the main ladder.

Information System:

446B Backhoe Loader Transmission (Autoshift) Pressure Taps
320C and 322C Forest Machines Hydraulic System Return Hydraulic System
5230B Excavator Electronic Systems Guide Location of Solenoids
C15 Petroleum Generator Set Engines Electronic Unit Injector Mechanism
325C and 325C L Excavator Bucket Linkage (D Family) - Lubricate
312C Excavator Machine Systems Alternate Pattern Control Valve - Remove
385B Excavator Capacities (Refill)
345B Series II Excavator Hydraulic System Pressure Gauge (Fine Filtration Filter) - Inspect - If Equipped
345B Series II Excavator Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
345B Series II Excavator Fuses - Replace
320C, 322C and 325C Excavators Tool Control System System 11: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
320C, 322C and 325C Excavators Tool Control System System 11: Relief Valve (Line) - Test and Adjust - Work Tool
314C Excavator Excavator Systems Bucket - Remove
2002/04/08 New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
5230B Excavator Electronic Systems Guide Location of Electronic Control Modules
5230B Excavator Electronic Systems Guide Component Location Overview
446B Backhoe Loader Transmission (Autoshift) Transmission and Torque Converter - Test
312C Excavator Machine Systems Bucket Linkage - Remove
312C Excavator Machine Systems Bucket Linkage - Install
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Automatic Engine Speed Control Function
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Auxiliary Hydraulic System
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Brake Light Function
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Configuration Menu
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Diagnostic Capabilities