Swing Drive
`
5230B Excavator Machine Systems
[RENR6520]
HYDRAULIC SYSTEM
DRIVE GP
5230B Excavator Machine Systems
Swing Drive
Show/hide table
| |
| Illustration 1 | g03873100 |
Show/hide table
| Specification for 185-1430 Swing Drive Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 110-6198 Swing Brake Gp | The swing brake consists of multiple discs. The brake is applied by spring force and hydraulically released. There are eight outer discs and seven inner discs. Apply SAE 30 CD oil to the contacting surfaces of the brake discs prior to assembly. |
| 2 | 4 | 6V-3531 Bolt | Torque to |
| 3 | - | - | There are 25 inner springs and 25 outer springs. Apply SAE 30 CD oil to the springs prior to assembly. |
| 4 | - | - | Apply SAE 30 CD Oil to the contacting surfaces of the seals. Install the backup rings and then install the seals prior to assembly. |
| - | - | - | Apply SAE 30 CD oil to the contacting surfaces of all the planetary gear (6) and bearing sets (5) prior to assembly. |
| 7 | 4 | 8T-2393 Bolt | Before assembly, apply red Loctite 263 to the threads. Tighten bolts to |
| 8 | 1 | 141-0749 O-Ring Seal | The seals must be packed with grease prior to assembly. |
| - | - | - | Before assembly, apply blue Loctite 243 to joining surfaces of cover (12) and housing (9). Install hexagon bolts (10). Tighten the 12 bolts to |
| 11 | 1 | 141-1211 Bearing | The bearings must be packed with grease prior to assembly. |
| 13 | 1 | 109-5727 Lip Type Seal | The seals must be packed with grease prior to assembly. |
Information System:
320C, 322C and 325C Excavators Tool Control System
System 2: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
320C, 322C and 325C Excavators Tool Control System
System 2: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
System 2: Default Value of Work Tool Parameters
345B Series II Excavator
SmartBoom Control
345B Series II Excavator
Joystick Controls - SmartBoom Control
345B Series II Excavator
Engine Speed Control
320B, 320B L and 320B N Excavators
Travel in Water and Mud
320C, 322C and 325C Excavators Tool Control System
System 1: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
System 1: Relief Valve (Line) - Test and Adjust - Work Tool
5230B Excavator Electronic Systems Guide
Location of Sensors
446B Backhoe Loader Transmission (Autoshift)
Transmission Control
W345B Series II Material Handler Machine System Specifications
Control Valve (Main)
320C, 322C and 325C Excavators Tool Control System
System 2: Relief Valve (Line) - Test and Adjust - Work Tool
320C, 322C and 325C Excavators Tool Control System
System 11: Default Value of Work Tool Parameters
320C, 322C and 325C Excavators Tool Control System
System 11: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
System 11: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
320C, 322C and 325C Excavators Tool Control System
System 11: Relief Valve (Line) - Test and Adjust - Work Tool
320C, 322C and 325C Excavators Tool Control System
System 11: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
345B Series II Excavator
Fuses - Replace
345B Series II Excavator
Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
345B Series II Excavator
Hydraulic System Pressure Gauge (Fine Filtration Filter) - Inspect - If Equipped
385B Excavator
Capacities (Refill)
312C Excavator Machine Systems
Alternate Pattern Control Valve - Remove
325C and 325C L Excavator
Bucket Linkage (D Family) - Lubricate