Track Adjuster
`
325D and 329D Excavators and 325D Material Handler Machine System Specifications
[RENR7423]
325D and 329D Excavators and 325D Material Handler Machine System Specifications
Relief Valve (Negative Flow Control) - Auxiliary, Combined Function
325D and 329D Excavators and 325D Material Handler Machine System Specifications
Fasteners - Swing Drive and Final Drive
UNDERCARRIAGE
IDLER GP
Show/hide table
 | |
| Illustration 1 | g01449049 |
Show/hide table
| Specification for 179-2998 Hydraulic Track Adjustment Gp | |||
| Item | Qty | Part | Specification Description |
| C | 1 | 099-0121 Lip Type Seal | Installation depth is 0.5 ± 0.5 mm (0.02 ± 0.02 inch). |
| 1 | 1 | 2S-5926 Relief Valve | Torque to 34 ± 5 N·m (301 ± 44 lb in). |
| 2 | 1 | 095-2927 Fill Valve | Torque to 34 ± 5 N·m (301 ± 44 lb in). |
| 3 | 1 | 179-3008 Cylinder | Lubricate the inside diameter of the cylinder and the seal grooves in the cylinder with the 5P-0960 Grease Cartridge . |
| 4 | 1 | 179-3007 Piston | Lubricate the outside diameter of the piston and the seal grooves in the piston with the 5P-0960 Grease Cartridge . |
| 5 | - | - | Fill the relief holes with the lubricant. |
| 6 | - | - | Before assembly, mounting surface for track roller frame must be clean and free of paint, protective coating and oil. |
Information System:
3500B Engines for Excavators
Air Inlet and Exhaust Lines
385B Excavator
Fuel System Secondary Filter - Replace
446B Backhoe Loader Transmission (Autoshift)
Transmission
385B Excavator
Fuel System Primary Filter (Water Separator) Element - Replace
446B Backhoe Loader Transmission (Autoshift)
Torque Converter
W345B Series II Material Handler Machine System Specifications
Stick Cylinder
446B Backhoe Loader Transmission (Autoshift)
Transmission (Autoshift)
385B Excavator
Engine Oil and Filter - Change
312C Excavator 3064 Engine Supplement
Muffler - Remove and Install
385B Excavator
Engine Oil Level - Check
385B Excavator
Engine Air Filter Primary Element - Clean/Replace
345B Series II Excavator Machine System Specifications
Boom Cylinder
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
5230B Excavator Hydraulic System
Boom, Bucket, Stick, Swing and Travel Cycle Times
385B Excavator
Hydraulic System Oil Filter (Pilot) - Replace
312C Excavator 3064 Engine Supplement
Electric Starting Motor - Remove and Install - Engine In Chassis
385B Excavator
Hydraulic System Oil Filter (Case Drain) - Replace
2001/07/23
New Dump Cylinder Tubes are Available {5057}
330C Excavator
Boom/Stick/Bucket Combinations
385B Excavator
Hydraulic System Oil Level - Check
385B Excavator
Hydraulic Tank Screen - Clean
385B Excavator
Refrigerant Dryer - Replace
312C Excavator 3064 Engine Supplement
V-Belts - Remove and Install
385B Excavator
Swing Drive Oil - Change