Boom
`
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
[RENR1964]
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Travel Counterbalance Valve
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Stick - 3600 mm (141.7 inch)
IMPLEMENTS
BOOM GP
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Boom - Fore Boom
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Boom
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Boom
Show/hide table
![]() | |
Illustration 1 | g00804033 |
Note: All bores must be free of paint. Coat all bores for pins with lubricant.
(1) Lubricate the sealing lip slightly with the lubricant that is being sealed.
(2) Two 207-9508 Sleeve Bearings
- Outside diameter ... 169.290 ± 0.013 mm (6.6649 ± 0.0005 inch)
- Inside diameter ... 145.34 + 0.10 - 0.00 mm (5.7220 + 0.004 - 0.000 inch)
- Install the bearing in the bearing bore. ... 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
- Inside diameter ... 145.34 + 0.10 - 0.00 mm (5.7220 + 0.004 - 0.000 inch)
(3) 149-9427 Pin
- Diameter after plating ... 129.850 ± 0.040 mm (5.1122 ± 0.0016 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
- Bore diameter for pin ... 130.05 ± 0.05 mm (5.120 ± 0.002 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
(4) Use the necessary shims to adjust the lateral clearance.
- Maximum clearance ... 1.6 mm (0.06 inch)
- Four 093-0090 Shims ... 1.0 mm (0.04 inch)
- Two 093-0122 Shims ... 2.0 mm (0.08 inch)
- Two 133-2427 Shims ... 0.5 mm (0.02 inch)
- Four 093-0090 Shims ... 1.0 mm (0.04 inch)
(5) Torque for two bolts ... 325 ± 40 N·m (240 ± 30 lb ft)
(6) Two 134-9031 Pin Assembly
- Diameter after plating ... 99.850 ± 0.040 mm (3.9311 ± .0016 inch)
- Minimum thickness for plating ... 0.005 mm (.0002 inch)
- Bore diameter for pin ... 100.043 ± 0.043 mm (3.9387 ± .0017 inch)
- Minimum thickness for plating ... 0.005 mm (.0002 inch)
(7) Torque for bolt ... 530 ± 40 N·m (391 ± 30 lb ft)
(8) 123-5342 Pin Assemblies
- Diameter after plating ... 119.850 ± 0.040 mm (4.7185 ± 0.0016 inch)
- Minimum thickness for plating ... 0.005 mm (.0002 inch)
- Bore diameter for pin ... 120.043 ± 0.043 mm (4.7261 ± 0.0017 inch)
- Minimum thickness for plating ... 0.005 mm (.0002 inch)
(9) Use the necessary shims to adjust the lateral clearance.
- Maximum clearance ... 1.6 mm (0.06 inch)
- 7Y-9266 Shim ... 1.6 mm (0.06 inch)
- Two 093-0074 Shims ... 1.0 mm (0.04 inch)
- 093-0106 Shim ... 2.0 mm (0.08 inch)
- 7Y-9266 Shim ... 1.6 mm (0.06 inch)
Information System:
312C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Disassemble - NFC Limit Valve
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 05
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems
Control Valve (Shift) - Assemble
5130B Excavator
Engine Air Filter Primary Element - Clean/Replace
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 03
322C Forest Machine Machine System Specifications
Boom - Log Loader
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems
Control Valve (Shift) - Disassemble
Procedure to Install 189-8642 Water Spray Kit for Dust Control on PC6 and PC9 Cold Planers{5612}
320C and 322C Forest Machines Hydraulic System
Main Hydraulic System
5230B Excavator Automatic Lubrication System
Lubrication Injector Banks - Adjust
315C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Install - NFC Limit Valve
315C Excavator Machine Systems
Main Hydraulic Pump - Remove
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 05
5130B Excavator
Engine Air Filter Secondary Element - Replace
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 06
312C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Assemble - NFC Limit Valve
5130B Excavator
Engine Air Precleaner - Clean
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Hydraulic System Oil - Change
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Radiator Core - Clean
5130B Excavator
Engine Oil Level - Check
320C and 322C Forest Machines Hydraulic System
Pilot Hydraulic System
320C and 322C Forest Machines Hydraulic System
Main Hydraulic System
320C and 322C Forest Machines Hydraulic System
Main Hydraulic System
5130B Excavator
Engine Oil and Filter - Change