322C Forest Machine Machine System Specifications Boom - Log Loader Caterpillar

Illustration 1	g01448925

Note: All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the upper frame and the cylinder pin bores.

(1) 228-5617 Sleeve Bearing

Quantity ... 2

Inside diameter ... 100.29 ± 0.04 mm (3.948 ± 0.002 inch)

Outside diameter ... 116.230 ± 0.013 mm (4.5760 ± 0.0005 inch)

Installation depth of the sleeve bearing ... 9.5 ± 0.8 mm (0.37 ± 0.03 inch)

(2) 4I-4619 Pin As

Pin diameter ... 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch)

Bore diameter for the pin assembly ... 90.043 mm (3.5450 inch)

(3) As required, use the following shim to adjust the maximum lateral clearance to 1.6 mm (0.06 inch):

093-0116 Shim

Quantity ... 8

Thickness of one shim ... 2 mm (0.1 inch)

(4) 101-2208 Pin

Pin diameter ... 89.820 ± 0.025 mm (3.5362 ± 0.0010 inch)

Bore diameter for the pin ... 90.043 mm (3.5450 inch)

(5) 113-2963 Pin As

Pin diameter ... 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch)

Bore diameter for the pin assembly ... 90.043 mm (3.5450 inch)

(6) As required, use the following shims to adjust the maximum lateral clearance to 1.6 mm (0.06 inch):

093-0084 Shim

Quantity ... 4

Thickness of one shim ... 1.0 mm (0.04 inch)

7Y-2497 Shim

Quantity ... 2

Thickness of one shim ... 1.6 mm (0.06 inch)

(7) Lubricate the sealing lip of the two lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the two lip type seals so that the lip type seals do not extend beyond the face of the boss.

Illustration 2	g01448936

Note: Use the 5P-0960 Grease Cartridge in order to fill with grease through the grease fitting (9) after mounting the pin at the boom foot. Before installing the pipe plug (8) , make sure that the grease flows out of the pipe plug hole.