Boom - 4.65 m (15.256 ft)
`
312F and 313F Excavator Machine System Specifications
[UENR6163]
312F and 313F Excavator Machine System Specifications
Stick Cylinder Lines
312F and 313F Excavator Machine System Specifications
Hydraulic Tank and Filter
IMPLEMENTS
BOOM GP
314E Excavator Machine System Specifications
Boom - VA Fore
312F and 313F Excavator Machine System Specifications
Boom - 4.65 m (15.256 ft)
312F and 313F Excavator Machine System Specifications
Boom - 2.40 m (7.874 ft)
312F and 313F Excavator Machine System Specifications
Boom - 4.65 m (15.256 ft)
Show/hide table
| |
| Illustration 1 | g06006863 |
|
Typical example | |
Show/hide table
| Specification for 390-5566 Boom, 390-5569 Reach Boom Gp, 390-5572 Reach Boom Gp, 390-5575 Boom, and 390-5576 Reach Boom Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, the stick, the upper frame, the bushing, and the cylinder pin bores. After you assemble the bushings coat all the bores and the bushings with 5P-0960 Grease Cartridge. | |||
| 1 | 2 | 166-1494 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 2 | 2 | 357-5710 Bushing | Bore before assembly is Installation depth is |
| 3 | 1 | 1R-6225 Pin As | Diameter is |
| 4 | 1 | 172-3080 Pin | Diameter is |
| 5 | 1 | 1R-6226 Pin As | Diameter is |
| 6 | As required, use the following shims to adjust the maximum lateral clearance of Mount the steel-shim to be at boom side. |
||
| 1 | 133-2425 Shim | Thickness is |
|
| 1 | 093-0115 Shim | Thickness is |
|
Information System:
320D2 GC Excavator Machine Systems
Boom - Remove and Install
Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565}
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Safety Messages
312F and 313F Excavator Machine System Specifications
Stick Cylinder Lines
A New Diesel Exhaust Fluid Filter is Now Available for C7.1 Machine Engines {108H}
316F Excavator Machine System Specifications
Main Hydraulic Pump
312F and 313F Excavator Machine System Specifications
Front Lines
318F Excavator Machine Systems
Swing Drive
316F Excavator Machine System Specifications
Pump Head (Main)
312F and 313F Excavator Machine Systems
Relief Valve (Cushion Crossover) - Anti-Reaction Valve
325F Excavator Machine Systems
Cab - Remove and Install
312F and 313F Excavator Machine Systems
Oil Makeup (Swing System)
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Declaration of Conformity
312F and 313F Excavator Machine Systems
Electronic Control (Travel System)
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Blade (If Equipped)
320D2 GC Excavator Machine Systems
Boom Bearings and Seals - Remove and Install
312F and 313F Excavator Machine Systems
Cylinder Speed - Check - Blade (If Equipped)
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Separate
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Piston and Connecting Rods - Remove and Install
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Connect
320D2 GC Excavator Machine Systems
Window Wiper Motor - Remove and Install - Upper
320D2 GC Excavator Machine Systems
Cab - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
325F Excavator Engine Supplement
Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Assemble