Main Hydraulic Pump
`
316F Excavator Machine System Specifications
[UENR5623]
316F Excavator Machine System Specifications
Pump Head (Main)
316F Excavator Machine System Specifications
Stick - 3.1 m (10.17 ft)
HYDRAULIC SYSTEM
PUMP GP
349E Excavator Machine System Specifications
Pump Control Valve
316F Excavator Machine System Specifications
Pump Head (Main)
316F Excavator Machine System Specifications
Main Hydraulic Pump
Show/hide table
| |
| Illustration 1 | g06018809 |
Show/hide table
| Specification for 434-2103 Piston Pump Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| Lubricate the sliding surfaces of the main hydraulic pump lightly, with clean hydraulic oil. | |||
| 1 | 13 | 094-1882 Plug | Before assembly, apply blue Loctite 5188 to the threads of plug. |
| Torque to |
|||
| 2 | 2 | 3J-1907 O-Ring Seal | Before assembly, lubricate the bores lightly with the lubricant that is being sealed. |
| 3 | 4 | 189-9763 O-Ring Seal | Before assembly, lubricate the bores lightly with the lubricant that is being sealed. |
| 4 | 2 | 199-0518 O-Ring Seal | Before assembly, lubricate the bores lightly with the lubricant that is being sealed. |
Show/hide table
| |
| Illustration 2 | g06018800 |
|
Section A-A | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 5 | 2 | 190-4896 Plug | Before assembly , apply blue Loctite 5188 to the threads of plug. |
| Torque to |
|||
| 6 | 2 | 207-2985 Orifice | Torque to |
| 7 | 1 | 5P-2545 O-Ring Seal | Before assembly, lubricate the bore of the O-ring seal lightly with the lubricant that is being sealed. |
| 8 | 12 | 165-2799 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
| E | 4 | 192-0573 Dowel Pin | Protrusion of the dowel pin after installation is |
Show/hide table
| |
| Illustration 3 | g06018804 |
|
Section D-D | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 9 | 2 | 8T-4136 Bolt | Torque to |
| 10 | 1 | 273-8315 O-Ring Seal | Before assembly, lubricate the bores lightly with the lubricant that is being sealed. |
| 11 | 1 | 353-5837 Lip Type Seal | Before assembly, lubricate the lip of the lip type seal lightly with the lubricant that is being sealed. |
| 12 | 4 | 8T-7547 Bolt | Before assembly, apply red Loctite 263 to threads. |
| 13 | 1 | 1H-7339 O-Ring Seal | Before assembly, lubricate the bores lightly with the lubricant that is being sealed. |
Information System:
312F and 313F Excavator Machine System Specifications
Front Lines
318F Excavator Machine Systems
Swing Drive
316F Excavator Machine System Specifications
Pump Head (Main)
312F and 313F Excavator Machine Systems
Relief Valve (Cushion Crossover) - Anti-Reaction Valve
325F Excavator Machine Systems
Cab - Remove and Install
312F and 313F Excavator Machine Systems
Oil Makeup (Swing System)
312F and 313F Excavator Machine Systems
Relief Valve (Swing)
Inspection Procedure for Boom Cylinder Assembly Cracks on Certain 330B, 330C, 345B, 345C, and 345D Excavators {5456, 7562}
312F and 313F Excavator Machine Systems
Electronic Control (Swing System)
320D2 GC Excavator Machine Systems
Boom Cylinder - Remove and Install
320D2 GC Excavator Machine Systems
Load Control Valve (Boom Cylinder) - Assemble
320D2 GC Excavator Machine Systems
Load Control Valve (Boom Cylinder) - Disassemble
A New Diesel Exhaust Fluid Filter is Now Available for C7.1 Machine Engines {108H}
312F and 313F Excavator Machine System Specifications
Stick Cylinder Lines
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Safety Messages
Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565}
320D2 GC Excavator Machine Systems
Boom - Remove and Install
312F and 313F Excavator Machine System Specifications
Boom - 4.65 m (15.256 ft)
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Declaration of Conformity
312F and 313F Excavator Machine Systems
Electronic Control (Travel System)
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Blade (If Equipped)
320D2 GC Excavator Machine Systems
Boom Bearings and Seals - Remove and Install
312F and 313F Excavator Machine Systems
Cylinder Speed - Check - Blade (If Equipped)
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Separate