Swing Drive
`
318F Excavator Machine Systems
[UENR5653]
HYDRAULIC SYSTEM
DRIVE GP
318E Excavator Machine System Specifications
Swing Drive
318F Excavator Machine Systems
Swing Drive
320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications
Swing Drive - Without Motor
Show/hide table
| |
| Illustration 1 | g06018794 |
Show/hide table
| Specification for 463-6943 Swing Drive Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 16 | 8T-0348 Bolt | Torque to |
| 2 | - | - | Prior to assembly, apply 8C-8422 Sealant to the flange surface of housing gear and ring gear. |
| B | - | - | After installing spring pins, make two stake marks at a distance (B) from each spring pin.
Distance of the pin hole from the bore |
| 3 | 1 | 148-4643 Bearing | Before assembly, apply Loctite C5A copper anti-seize to the outer diameter and the inner diameter of the mating parts of the roller bearings. |
| 4 | 1 | 095-1022 Roller Bearing | |
| 5 | 1 | 6V-7238 Shutoff Valve | Final installation torque to When shutting off, tighten valve to |
| 6 | 2 | 199-4561 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Lubricate the circumference of the lip type seals with grease, when the lip type seals are installed in the cage. |
Information System:
316F Excavator Machine System Specifications
Pump Head (Main)
312F and 313F Excavator Machine Systems
Relief Valve (Cushion Crossover) - Anti-Reaction Valve
325F Excavator Machine Systems
Cab - Remove and Install
312F and 313F Excavator Machine Systems
Oil Makeup (Swing System)
312F and 313F Excavator Machine Systems
Relief Valve (Swing)
Inspection Procedure for Boom Cylinder Assembly Cracks on Certain 330B, 330C, 345B, 345C, and 345D Excavators {5456, 7562}
312F and 313F Excavator Machine Systems
Electronic Control (Swing System)
320D2 GC Excavator Machine Systems
Boom Cylinder - Remove and Install
320D2 GC Excavator Machine Systems
Load Control Valve (Boom Cylinder) - Assemble
320D2 GC Excavator Machine Systems
Load Control Valve (Boom Cylinder) - Disassemble
320D2 GC Excavator Machine Systems
Load Control Valve (Boom Cylinder) - Remove and Install
320D2 GC Excavator Machine Systems
Stick Bearings and Seals - Remove and Install
312F and 313F Excavator Machine System Specifications
Front Lines
316F Excavator Machine System Specifications
Main Hydraulic Pump
A New Diesel Exhaust Fluid Filter is Now Available for C7.1 Machine Engines {108H}
312F and 313F Excavator Machine System Specifications
Stick Cylinder Lines
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Safety Messages
Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565}
320D2 GC Excavator Machine Systems
Boom - Remove and Install
312F and 313F Excavator Machine System Specifications
Boom - 4.65 m (15.256 ft)
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Declaration of Conformity
312F and 313F Excavator Machine Systems
Electronic Control (Travel System)
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Blade (If Equipped)
320D2 GC Excavator Machine Systems
Boom Bearings and Seals - Remove and Install