312F and 313F Excavator Machine System Specifications Pilot Lines Caterpillar


Pilot Lines
`


Illustration 1g06018424

Table 1
Specification for 428-8236 Pilot Lines Gp 
Item  Qty  Part  Specification Description 
12  7K-1181 Cable Strap  Sharp corners at the cutting edge of each cable strap shall not be allowed. 
148-8378 Elbow As  Torque to 40 ± 5 N·m (30 ± 4 lb ft)
148-8435 Tee As  Torque to 40 ± 5 N·m (30 ± 4 lb ft)
148-8353 Elbow As  Torque to 40 ± 5 N·m (30 ± 4 lb ft)
150-3036 Elbow As  Torque to 29 ± 3 N·m (257 ± 27 lb in)
148-8435 Tee As  Torque to 29 ± 3 N·m (257 ± 27 lb in)
292-7180 Grommet  Before assembly, apply Loctite Spray Adhesive to the grommet and adhere to the swing frame. 
148-8336 Connector As  Torque to 29 ± 3 N·m (257 ± 27 lb in)

Information System:

318F Excavator Machine Systems Stick - 3.1 m (10.17 ft)
323F Excavator Hydraulic System Oil - Change
323F Excavator Hydraulic System Oil Filter (Case Drain) - Replace
320D2 GC Excavator Machine System Specifications Air Conditioner Lines
323F Excavator Hydraulic System Oil Filter (Pilot) - Replace
312F and 313F Excavator Machine System Specifications Swivel Lines
323F Excavator Hydraulic System Oil Filter (Return) - Replace
323F Excavator Hydraulic System Oil Level - Check
312F and 313F Excavator Machine System Specifications Swing Drive
318F Excavator Machine Systems Stick - 2.6 m (8.53 ft)
312F and 313F Excavator Machine System Specifications Swing Drive Mounting
318F Excavator Machine Systems Stick - 3.1 m (10.17 ft)
Procedure to Rework Main Frames of Certain 422F, 428F, 432F, 434F, and 444F Backhoe Loaders {7054}
318F Excavator Machine Systems Stick - 3.1 m (10.17 ft)
312F and 313F Excavator Machine Systems Electronic Control (Boom System)
312F and 313F Excavator Machine Systems Shovel Crane - Test and Adjust
320D2 GC Excavator Machine Systems Bucket Cylinder - Remove and Install
312F and 313F Excavator Machine Systems Electronic Control (Stick System)
320D2 GC Excavator Machine Systems Load Control Valve (Stick Cylinder) - Remove and Install
320D2 GC Excavator Machine Systems Load Control Valve (Stick Cylinder) - Disassemble
312F and 313F Excavator Machine Systems Electronic Control (Bucket System)
320D2 GC Excavator Machine Systems Load Control Valve (Stick Cylinder) - Assemble
320D2 GC Excavator Machine Systems Stick Cylinder - Remove and Install
320D2 GC Excavator Machine Systems Stick - Remove and Install