Swing Drive
`
312F and 313F Excavator Machine System Specifications
[UENR6163]
312F and 313F Excavator Machine System Specifications
Swing Drive Mounting
312F and 313F Excavator Machine System Specifications
Swivel Lines
HYDRAULIC SYSTEM
DRIVE GP
312F and 313F Excavator Machine System Specifications
Swing Drive Mounting
312F and 313F Excavator Machine System Specifications
Swing Drive
1.1. 467-4412 Swing Drive Gp
Show/hide table
| |
| Illustration 1 | g06018312 |
|
Typical example | |
Show/hide table
| Specification for 424-0519 Swing Drive Gp and 424-0520 Swing Drive Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 267-6744 Breather As | Torque to |
| 2 | 1 | 424-0524 Gauge Pipe | Torque to |
| 3 | 12 | 8T-5041 Bolt | Before assembly, apply blue Loctite 243 to threads.
Torque to |
| 4 | 1 | 099-3563 Connector | Torque to |
| 5 | 1 | 6V-7238 Shutoff Valve | Torque for installing the shutoff valve: Torque for shutting the shutoff valve: |
Show/hide table
| |
| Illustration 2 | g06018314 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 6 | 1 | 333-3048 Carrier | Before assembly, apply Loctite C5A Copper Anti-Seize to the spline of carrier mating parts. |
| 7 | 1 | 353-0541 Lip Type Seal | Before you install the lip type seal, apply white Loctite 536 to the housing.
Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 8 | 6 | 7X-2619 Bolt | Before assembly, apply blue Loctite 243 to threads.
Torque to |
Information System:
318F Excavator Machine Systems
Stick - 2.6 m (8.53 ft)
312F and 313F Excavator Machine System Specifications
Swing Drive Mounting
318F Excavator Machine Systems
Stick - 3.1 m (10.17 ft)
312F and 313F Excavator Machine System Specifications
Swing Gear and Bearing
312F and 313F Excavator Machine System Specifications
Fuel Tank
318F Excavator Machine Systems
Stick - 2.25 m (7.381 ft)
312F and 313F Excavator Machine Systems
Electronic Control (Main Pump System)
312F and 313F Excavator Machine Systems
Electronic Control (Pilot System)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Glow Plugs - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Cylinder Head - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Flywheel - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Pump - Remove and Install
323F Excavator
Hydraulic System Oil Level - Check
323F Excavator
Hydraulic System Oil Filter (Return) - Replace
312F and 313F Excavator Machine System Specifications
Swivel Lines
323F Excavator
Hydraulic System Oil Filter (Pilot) - Replace
320D2 GC Excavator Machine System Specifications
Air Conditioner Lines
323F Excavator
Hydraulic System Oil Filter (Case Drain) - Replace
323F Excavator
Hydraulic System Oil - Change
318F Excavator Machine Systems
Stick - 3.1 m (10.17 ft)
312F and 313F Excavator Machine System Specifications
Pilot Lines
Procedure to Rework Main Frames of Certain 422F, 428F, 432F, 434F, and 444F Backhoe Loaders {7054}
318F Excavator Machine Systems
Stick - 3.1 m (10.17 ft)
312F and 313F Excavator Machine Systems
Electronic Control (Boom System)