Stick - 2.25 m (7.381 ft)
`
318F Excavator Machine Systems
[UENR5653]
IMPLEMENTS
STICK GP
318E Excavator Machine System Specifications
Stick - 3.1 m (10.17 ft)
318E Excavator Machine System Specifications
Stick - 2.6 m (8.53 ft)
318E Excavator Machine System Specifications
Stick - 2.9 m (9.51 ft)
316F Excavator Machine System Specifications
Stick - 2.6 m (8.53 ft)
316F Excavator Machine System Specifications
Stick - 2.2 m (7.22 ft)
318F Excavator Machine Systems
Stick - 2.25 m (7.381 ft)
318F Excavator Machine Systems
Stick - 3.1 m (10.17 ft)
Show/hide table
| |
| Illustration 1 | g06018276 |
Show/hide table
| Specification for 367-1669 Hoe Stick Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores. | |||
| 1 | - | - | The stick cylinder must be assembled in order to orient the grease zerk, as shown. |
| 2 | 1 | 107-9852 Pin As | Diameter is |
| 3 | 1 | 4I-4809 Pin As | Diameter is |
| 4 | 2 | 166-1495 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 5 | 4 | 235-7679 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 6 | 2 | 229-1096 Bushing(1) | Bore before installation is Installation depth is |
| 7 | 2 | 228-5614 Bushing(1) | Bore before installation is Installation depth is |
| 8 | 2 | 357-5709 Bushing(1) | Bore before installation is Installation depth is |
Show/hide table
| (1) | Install the bushing in the bore so that the part number of the bushing is facing outward. |
Information System:
312F and 313F Excavator Machine Systems
Electronic Control (Main Pump System)
312F and 313F Excavator Machine Systems
Electronic Control (Pilot System)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Glow Plugs - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Cylinder Head - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Flywheel - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Pump - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Cooler - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Turbocharger - Remove and Install
320D2 GC Excavator Machine Systems
Bucket Linkage Bearings and Seals - Remove and Install
314D CR Hydraulic Excavator Machine Systems
Recoil Spring - Assemble
320D2 GC Excavator Machine Systems
Bucket Linkage - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Electronic Unit Injector - Remove and Install
312F and 313F Excavator Machine System Specifications
Fuel Tank
312F and 313F Excavator Machine System Specifications
Swing Gear and Bearing
318F Excavator Machine Systems
Stick - 3.1 m (10.17 ft)
312F and 313F Excavator Machine System Specifications
Swing Drive Mounting
318F Excavator Machine Systems
Stick - 2.6 m (8.53 ft)
312F and 313F Excavator Machine System Specifications
Swing Drive
323F Excavator
Hydraulic System Oil Level - Check
323F Excavator
Hydraulic System Oil Filter (Return) - Replace
312F and 313F Excavator Machine System Specifications
Swivel Lines
323F Excavator
Hydraulic System Oil Filter (Pilot) - Replace
320D2 GC Excavator Machine System Specifications
Air Conditioner Lines
323F Excavator
Hydraulic System Oil Filter (Case Drain) - Replace