Upper Frame
`
320D2 GC Excavator Machine System Specifications
[UENR6213]
320D2 GC Excavator Machine System Specifications
Muffler
320D2 GC Excavator Machine System Specifications
Swing Gear and Bearing
FRAME AND BODY
FRAME GP
320D2 GC Excavator Machine System Specifications
Upper Frame
Show/hide table
| |
| Illustration 1 | g06017708 |
|
Typical example Top view | |
Show/hide table
| Specification for 473-1824 Upper Frame and 494-7574 Upper Frame | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| Before assembly, use black 5P-0960 Grease Cartridge to coat all the pin bores. | |||
| 1 | As required, use the following shims to adjust the maximum lateral clearance to |
||
| 2 | 133-2425 Shim | Thickness is |
|
| 4 | 093-0083 Shim | Thickness is |
|
| 2 | 093-0115 Shim | Thickness is |
|
| 2 | 2 | 154-0480 Pin As | Diameter is |
| A | - | - | Clearance between the pin end and the side of the cab must be kept over |
| 3 | As required, use the following shims to adjust the maximum lateral clearance to |
||
| 1 | 308-8775 Shim | Thickness is |
|
| 2 | 308-8776 Shim | Thickness is |
|
| 1 | 308-8777 Shim | Thickness is |
|
| 4 | 1 | 315-0800 Pin As | Diameter is |
Information System:
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Fuel Manifold (Rail) - Remove and Install
320D2 GC Excavator Machine System Specifications
Muffler
316F Excavator Machine System Specifications
Air Conditioner Lines
312F and 313F Excavator Machine System Specifications
Hydraulic Oil Lines
A Heavy-Duty Bucket GP is Available For Certain Backhoe Loaders {6503}
320D2 GC Excavator Engine Supplement
Water Temperature Regulator - Remove and Install
320D2 GC Excavator Engine Supplement
Muffler - Remove and Install
312F and 313F Excavator Machine Systems
Travel Motor - Test - Measurement of Case Drain Oil
312F and 313F Excavator Machine Systems
Relief Valve (Crossover) - Test and Adjust
A Stronger Secondary Air Filter Is Now Available For F and F2 Series Backhoe Loaders {1051, 1054}
325F Excavator Machine Systems
Boom Bearings - Remove and Install
312F and 313F Excavator Machine Systems
Relief Valve (Blade) - Test and Adjust - If Equipped
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System
Return Hydraulic System
307E2 Mini Hydraulic Excavator Machine Systems
Hydraulic Lockout Control - Remove and Install
320D2 GC Excavator Machine System Specifications
Swing Gear and Bearing
320D2 GC Excavator Machine Systems
Duo-Cone Conventional Seals - Install
320D2 GC Excavator Machine Systems
Bucket - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Electronic Unit Injector - Remove and Install
320D2 GC Excavator Machine Systems
Bucket Linkage - Remove and Install
314D CR Hydraulic Excavator Machine Systems
Recoil Spring - Assemble
320D2 GC Excavator Machine Systems
Bucket Linkage Bearings and Seals - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Turbocharger - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Cooler - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Oil Pump - Remove and Install