Muffler
`
320D2 GC Excavator Machine System Specifications
[UENR6213]
320D2 GC Excavator Machine System Specifications
Hood
320D2 GC Excavator Machine System Specifications
Upper Frame
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP
320D2 GC Excavator Machine System Specifications
Muffler
Show/hide table
| |
| Illustration 1 | g06017633 |
Show/hide table
| Specification for 460-2092 Muffler Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 4 | 8T-4133 Nut | Torque to |
| 2 | 4 | 8T-4133 Nut | Torque to |
| 3 | - | - | Before assembly, apply thin coat of 2P-2333 Sealant to the outside diameter of the male end. Remove the excess sealer from the assembled joints before clamp assembly. |
| 4 | 1 | 514-1945 Seal Clamp | Torque to |
| 5 | - | - | Before assembly, apply thin coat of 2P-2333 Sealant to taper of turbocharger outlet pipe.
Remove the excess sealer from the assembled joints before clamp assembly. |
| 6 | 1 | 457-6013 Strap | Torque to |
Information System:
316F Excavator Machine System Specifications
Air Conditioner Lines
312F and 313F Excavator Machine System Specifications
Hydraulic Oil Lines
A Heavy-Duty Bucket GP is Available For Certain Backhoe Loaders {6503}
320D2 GC Excavator Engine Supplement
Water Temperature Regulator - Remove and Install
320D2 GC Excavator Engine Supplement
Muffler - Remove and Install
312F and 313F Excavator Machine Systems
Travel Motor - Test - Measurement of Case Drain Oil
312F and 313F Excavator Machine Systems
Relief Valve (Crossover) - Test and Adjust
A Stronger Secondary Air Filter Is Now Available For F and F2 Series Backhoe Loaders {1051, 1054}
325F Excavator Machine Systems
Boom Bearings - Remove and Install
312F and 313F Excavator Machine Systems
Relief Valve (Blade) - Test and Adjust - If Equipped
307E2 Mini Hydraulic Excavator Machine Systems
Heating and Air Conditioning Unit - Install
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Fuel Manifold (Rail) - Remove and Install
320D2 GC Excavator Machine System Specifications
Upper Frame
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System
Return Hydraulic System
307E2 Mini Hydraulic Excavator Machine Systems
Hydraulic Lockout Control - Remove and Install
320D2 GC Excavator Machine System Specifications
Swing Gear and Bearing
320D2 GC Excavator Machine Systems
Duo-Cone Conventional Seals - Install
320D2 GC Excavator Machine Systems
Bucket - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Electronic Unit Injector - Remove and Install
320D2 GC Excavator Machine Systems
Bucket Linkage - Remove and Install
314D CR Hydraulic Excavator Machine Systems
Recoil Spring - Assemble
320D2 GC Excavator Machine Systems
Bucket Linkage Bearings and Seals - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Turbocharger - Remove and Install