316F Excavator Machine System Specifications Air Conditioner Lines Caterpillar


Air Conditioner Lines
`


Illustration 1g06017576

Table 1
Specifications for 476-1329 Air Conditioner Lines Gp 
Item  Qty  Part  Specification Description 
6V-7357 Bolt  Torque to 10 ± 2 N·m (89 ± 18 lb in)
8T-4189 Bolt  Torque to 22.0 ± 5.5 N·m (194.7 ± 48.7 lb in)
7X-2537 Bolt  Torque to 22.5 ± 2.5 N·m (199.1 ± 22.1 lb in)


Illustration 2g06017581
View of Area A

Table 2
Item  Qty  Part  Specification Description 
5C-9553 Bolt  Tighten the bolts to 6 ± 1 N·m (53 ± 9 lb in) or until zero gap is achieved. 

Information System:

312F and 313F Excavator Machine System Specifications Hydraulic Oil Lines
A Heavy-Duty Bucket GP is Available For Certain Backhoe Loaders {6503}
320D2 GC Excavator Engine Supplement Water Temperature Regulator - Remove and Install
320D2 GC Excavator Engine Supplement Muffler - Remove and Install
312F and 313F Excavator Machine Systems Travel Motor - Test - Measurement of Case Drain Oil
312F and 313F Excavator Machine Systems Relief Valve (Crossover) - Test and Adjust
A Stronger Secondary Air Filter Is Now Available For F and F2 Series Backhoe Loaders {1051, 1054}
325F Excavator Machine Systems Boom Bearings - Remove and Install
312F and 313F Excavator Machine Systems Relief Valve (Blade) - Test and Adjust - If Equipped
307E2 Mini Hydraulic Excavator Machine Systems Heating and Air Conditioning Unit - Install
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}
320D2 GC Excavator Machine System Specifications Muffler
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
320D2 GC Excavator Machine System Specifications Upper Frame
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Return Hydraulic System
307E2 Mini Hydraulic Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
320D2 GC Excavator Machine System Specifications Swing Gear and Bearing
320D2 GC Excavator Machine Systems Duo-Cone Conventional Seals - Install
320D2 GC Excavator Machine Systems Bucket - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
320D2 GC Excavator Machine Systems Bucket Linkage - Remove and Install
314D CR Hydraulic Excavator Machine Systems Recoil Spring - Assemble
320D2 GC Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove and Install