312F and 313F Excavator Machine System Specifications Hydraulic Oil Lines Caterpillar


Hydraulic Oil Lines
`


Illustration 1g06017536

Table 1
Specification for 441-6858 Hydraulic Oil Lines Gp 
Item  Qty  Part  Specification Description 
7K-1181 Cable Strap  Sharp corner at each cutting edge of all the cable straps shall not be allowed. 
148-8354 Elbow As  Torque to 41 to 45 N·m (30 to 33 lb ft)
354-4556 Hose As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
214-4513 Hydraulic Fitting Gp  Torque to 95 to 103 N·m (70 to 76 lb ft)
148-8345 Connector As  Torque to 70 to 77 N·m (52 to 57 lb ft)
368-1535 Hose As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
8T-4176 Bolt  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
131-9869 Hose As  Torque to 160 ± 16 N·m (118 ± 12 lb ft)
148-8327 Connector As  Torque to 95 to 103 N·m (70 to 76 lb ft)

Information System:

A Heavy-Duty Bucket GP is Available For Certain Backhoe Loaders {6503}
320D2 GC Excavator Engine Supplement Water Temperature Regulator - Remove and Install
320D2 GC Excavator Engine Supplement Muffler - Remove and Install
312F and 313F Excavator Machine Systems Travel Motor - Test - Measurement of Case Drain Oil
312F and 313F Excavator Machine Systems Relief Valve (Crossover) - Test and Adjust
A Stronger Secondary Air Filter Is Now Available For F and F2 Series Backhoe Loaders {1051, 1054}
325F Excavator Machine Systems Boom Bearings - Remove and Install
312F and 313F Excavator Machine Systems Relief Valve (Blade) - Test and Adjust - If Equipped
307E2 Mini Hydraulic Excavator Machine Systems Heating and Air Conditioning Unit - Install
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat Grade Control, for 349F, 352F, 349FXE, and 352FXE {7220}
The Axle Hub Shaft Seal is Leaking on The Steering Axle of Certain Machines {3256, 3258, 3260, 4251}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
316F Excavator Machine System Specifications Air Conditioner Lines
320D2 GC Excavator Machine System Specifications Muffler
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
320D2 GC Excavator Machine System Specifications Upper Frame
349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Return Hydraulic System
307E2 Mini Hydraulic Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
320D2 GC Excavator Machine System Specifications Swing Gear and Bearing
320D2 GC Excavator Machine Systems Duo-Cone Conventional Seals - Install
320D2 GC Excavator Machine Systems Bucket - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
320D2 GC Excavator Machine Systems Bucket Linkage - Remove and Install
314D CR Hydraulic Excavator Machine Systems Recoil Spring - Assemble