316F Excavator Machine System Specifications Hydraulic Tank and Filter Caterpillar

Hydraulic Tank and Filter

`

316F Excavator Machine System Specifications [UENR5623]

316F Excavator Machine System Specifications Pilot Valve - Stick

316F Excavator Machine System Specifications Fuel Tank and Mounting

HYDRAULIC SYSTEM

TANK GP

316F Excavator Machine System Specifications Hydraulic Tank and Filter

Show/hide table




Illustration 1	g06016272

Show/hide table

Table 1
Specification for 478-5094 Tank and Filter Gp
Item	Qty	Part	Specification Description
1	8	8T-4184 Bolt	Torque to 50 ± 10 N·m (37 ± 7 lb ft).
2	1	363-2518 Breather Gp	Before assembly, apply 5P-3975 Rubber Lubricant to mating surface.
3	4	8T-4908 Bolt	Torque to 26 ± 3 N·m (230 ± 27 lb in).
4	3	8T-4136 Bolt	Torque to 30 ± 7 N·m (266 ± 62 lb in).
5	1	289-8194 Oil Filter Gp	Torque to 13.7 ± 2.0 N·m (121.3 ± 17.7 lb in).
6	4	170-8553 Bolt	Torque to 50 ± 10 N·m (37 ± 7 lb ft).
7	1	164-5567 Quick Disconnect Coupler As	Torque to 31 ± 3 N·m (274 ± 27 lb in).
8	1	164-5590 Fluid Sampling Valve Gp	Torque to 14.5 ± 1.5 N·m (128.3 ± 13.3 lb in).
9	1	315-4441 Pressure Switch	Torque to 14 ± 1 N·m (124 ± 9 lb in).
10	1	256-6453 Temperature Sensor	Torque to 20 ± 3 N·m (177 ± 27 lb in).

Show/hide table




Illustration 2	g06016283
Bottom view

Show/hide table

Table 2
Item	Qty	Part	Specification Description
11	1	347-6081 Sight Gauge Gp	Torque to 6 ± 1 N·m (53 ± 9 lb in).
12	1	7B-3039 Spring	Length under test force is 26.2 mm (1.03 inch). Test force is 14.32 to 16.81 N (3.22 to 3.78 lb). Free length after test is 36.5 mm (1.44 inch).
13	1	9J-7031 Drain Plug	Torque to 68 ± 7 N·m (50 ± 5 lb ft).

Show/hide table




Illustration 3	g06016289
259-0920 Hydraulic Screen Gp

Show/hide table

Table 3
Item	Qty	Part	Specification Description
14	1	095-6639 Spring	Length under test force is 28 mm (1.1 inch). Test force is 23.3 N (5.2 lb). Free length after test is 35 mm (1.4 inch).
15	1	8T-4133 Nut	Torque to 29 ± 5 N·m (257 ± 44 lb in).
16	1	8T-4133 Nut	Torque to 18 ± 2 N·m (159 ± 18 lb in).

Information System:

Improved Hose Routing on MP Bucket For 434 and 444 E and F Series Backhoe Loaders {5057}

New Tilting Steering Column Gas Spring available for E and F series Backhoe Loaders {4310, 4338}

316F Excavator Machine System Specifications Pilot Valve - Stick

300.9D VPS Mini Hydraulic Excavator Machine Systems Travel System

PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Electrical Output Components

C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft - Remove

PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Electronic Control Module (ECM) - ECM Locations

300.9D VPS Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge)

Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513}

PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Electrical Input Components

PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Location of Electrical Components

320GC, 320 and 323 Excavators Machine Systems Duo-Cone Conventional Seals - Install

349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Boom Drift Reduction Valve

Installation Procedure for the 467-4407 Front Lines Gp On Certain Hydraulic Excavators {5057}

312F and 313F Excavator Machine Systems Pump Control (Negative Flow) - Test

325F Excavator Machine Systems Drift Reduction Valve (Boom) - Disassemble

325F Excavator Machine Systems Drift Reduction Valve (Boom) - Assemble

349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Swing Hydraulic System

325F Excavator Machine Systems Boom Cylinder - Remove and Install

312F and 313F Excavator Machine Systems Gear Pump (Pilot) - Test

312F and 313F Excavator Machine Systems Specifications

C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft - Install

325F Excavator Machine Systems Boom - Remove

349D2 MHPU Mobile Hydraulic Power Unit Hydraulic System Relief Valve (Swing)