EPC Parts Catalogs

336D2 and 340D2 Excavators Machine System Front Lines Caterpillar


  1. Home
  2. Specifications
  3. #114053
Front Lines
`
336D2 and 340D2 Excavators Machine System [UENR6246]
336D2 and 340D2 Excavators Machine System Pump Head
336D2 and 340D2 Excavators Machine System Final Drive
HYDRAULIC SYSTEM
LINES GP-FRONT
336D2 and 340D2 Excavators Machine System Front Lines
336D2 and 340D2 Excavators Machine System Front Lines
336D2 and 340D2 Excavators Machine System Front Lines
Show/hide table
Illustration 1g06156299

Show/hide table
Table 1
Specification for 476-2949 Front Lines Gp 
Item  Qty  Part  Specification Description 
1  2  148-8336 Connector As  Torque to 29 ± 3 N·m (257 ± 27 lb in). 
2  1  338-6970 Pressure Sensor Gp  Before assembly, apply thin hydraulic oil to outside diameter of male thread.
Torque to 64 ± 3 N·m (47 ± 2 lb ft). 
3  1  168-1968 Tee As  Torque to 29 ± 3 N·m (257 ± 27 lb in). 
4  2  7I-2272 Bolt  Torque to 7 ± 1 N·m (62 ± 9 lb in). 
5  1  148-8393 Elbow As  Torque to 114.5 ± 17.0 N·m (84.5 ± 12.5 lb ft). 
6  1  487-4990 Hose As  Torque to 114.5 ± 17.0 N·m (84.5 ± 12.5 lb ft). 
7  1  148-8414 Reducer As  Torque to 160 ± 16 N·m (118 ± 12 lb ft). 
8  7  7K-1181 Cable Strap  Sharp corners at each cutting edge of all the cable straps shall not be allowed. 
9  1  150-4033 Tee As  Torque to 160 ± 16 N·m (118 ± 12 lb ft). 
10  2  148-8415 Reducer As  Torque to 76 ± 4 N·m (56 ± 3 lb ft). 
11  1  148-8378 Elbow As  Torque to 24 ± 2 N·m (212 ± 18 lb in). 
12  1  123-4750 Check Valve As  Torque to 34 to 38 N·m (25 to 28 lb ft). 
13  -  -  Tighten the connector to 40 to 44 N·m (30 to 33 lb ft). 
14  2  5P-5148 Cable Strap  Sharp corners at each cutting edge of all the cable straps shall not be allowed. 

Information System:

Full Length Track Guide Guards are Recommended for Certain 349D and 349D2 Excavators Operating in Hard Material Conditions {4177}
320E and 323E Excavators Machine Electronic Control System MID 299, 5324-6
320E and 323E Excavators Machine Electronic Control System MID 299, 5324-4
320E and 323E Excavators Machine Electronic Control System MID 299, 5323-6
320E and 323E Excavators Machine Electronic Control System MID 299, 5323-4
320E and 323E Excavators Machine Electronic Control System MID 299, 5322-6
320E and 323E Excavators Machine Electronic Control System MID 299, 5322-4
325F Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
325F Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
An Improved Blade Cylinder is Now Used on Certain 305.5E, 305.5E2, 306, 306E, and 306E2 Mini Hydraulic Excavators {5102, 7164}
A New Service Meter Unit (SMU) Is Now Used On Certain 300.9D Mini Hydraulic Excavators {5258, 7451}
Normal Performance Conditions of Engines on Certain Mini Hydraulic Excavator {0645, 1000, 1051, 7000}
Rework Procedure for the Gas Spring Assembly of Hood Group for Certain 318D2, 320D2, 323D2, 326D2, 329D2, and 330D2 Excavators {7251, 7276}
320E and 323E Excavators Machine Electronic Control System MID 299, 5227-3
320E and 323E Excavators Machine Electronic Control System MID 299, 5226-4
320E and 323E Excavators Machine Electronic Control System MID 299, 5226-3
320E and 323E Excavators Machine Electronic Control System MID 299, 5226-8
323F LN Excavator Declaration of Conformity
318F Excavator Machine Systems Electronic Control (Machine System)
335F Excavator Cooling System Coolant Sample (Level 1) - Obtain
335F Excavator Cooling System Coolant (ELC) - Change
325F Excavator Machine Systems Bucket Cylinder - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
318F Excavator Machine Systems Engine Control