Track Roller (Single Flange)
`
MD6200 Rotary Blasthole Drill Machine Systems
[M0102096]
Show/hide table
| |
| Illustration 1 | g06010401 |
|
Typical example | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | - | - | Before assembly, the surfaces must be clean and free of protective coating. |
| 2 | 2 | 8F-8882 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 3 | 2 | Bushing | Bore after assembly is |
| 4 | 1 | 9W-2146 Plug | Before assembly, apply blue Loctite 243 to threads.
Torque to |
| 5 | 2 | - | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. |
| - | - | - | End play for the track roller shaft:
Minimum is Maximum is |
Information System:
336D2 and 340D2 Excavators Machine System
Track
336D2 and 340D2 Excavators Machine System
Pilot Lines
320 Excavator
Fire Prevention and Explosion Prevention
A New Starter Flange Is Now Available on Certain Machine Engines {1453}
M314F and M316F Wheeled Excavators Hydraulic System
Flow (Control Valve Combined Function) - Test and Adjust
320D2 GC Excavator Hydraulic System
Engine Performance - Test - Engine Speed
320D2 GC Excavator Hydraulic System
Main Pump (Flow) - Test - Hydraulic Power
M314F and M316F Wheeled Excavators Hydraulic System
Travel Motor (Destroke Point) - Test and Adjust
730C2 Articulated Truck
Differential and Final Drive Oil - Change
336D2 and 340D2 Excavators Machine System
Hydraulic Tank
336D2 and 340D2 Excavators Machine System
Hydraulic Tank and Filter
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Hydraulic Tank and Filter - Remove and Install
336D2 and 340D2 Excavators Machine System
Circuit Breakers
336D2 and 340D2 Excavators Machine System
Track Roller
336D2 and 340D2 Excavators Machine System
Circuit Breakers
336D2 and 340D2 Excavators Machine System
Pump Head
Normal Performance Conditions of Engines on Certain Mini Hydraulic Excavator {0645, 1000, 1051, 7000}
A New Service Meter Unit (SMU) Is Now Used On Certain 300.9D Mini Hydraulic Excavators {5258, 7451}
An Improved Blade Cylinder is Now Used on Certain 305.5E, 305.5E2, 306, 306E, and 306E2 Mini Hydraulic Excavators {5102, 7164}
325F Excavator Machine Systems
Bucket Linkage Bearings and Seals - Remove
325F Excavator Machine Systems
Bucket Linkage Bearings and Seals - Install
320E and 323E Excavators Machine Electronic Control System
MID 299, 5322-4
320E and 323E Excavators Machine Electronic Control System
MID 299, 5322-6
320E and 323E Excavators Machine Electronic Control System
MID 299, 5323-4