336D2 and 340D2 Excavators Machine System Pilot Lines Caterpillar


Pilot Lines
`


Illustration 1g06010375

Table 1
Specification for 471-5240 Pilot Lines Gp 
Item  Qty  Part  Specification Description 
176-4746 Grommet  Apply Loctite spray adhesive to grommets and adhere to swing frame. 
148-8378 Elbow As  Torque to 29 ± 2 N·m (257 ± 18 lb in)
148-8435 Tee As  Torque to 29 ± 2 N·m (257 ± 18 lb in)
148-8336 Connector As  Torque to 29 ± 2 N·m (257 ± 18 lb in)
Apply Loctite spray adhesive to grommets and adhere to swing frame. 
7K-1181 Cable Strap  Sharp corners at the cutting edge of each cable strap shall not be allowed. 

Information System:

320 Excavator Fire Prevention and Explosion Prevention
A New Starter Flange Is Now Available on Certain Machine Engines {1453}
M314F and M316F Wheeled Excavators Hydraulic System Flow (Control Valve Combined Function) - Test and Adjust
320D2 GC Excavator Hydraulic System Engine Performance - Test - Engine Speed
320D2 GC Excavator Hydraulic System Main Pump (Flow) - Test - Hydraulic Power
M314F and M316F Wheeled Excavators Hydraulic System Travel Motor (Destroke Point) - Test and Adjust
730C2 Articulated Truck Differential and Final Drive Oil - Change
336D2 and 340D2 Excavators Machine System Hydraulic Tank
336D2 and 340D2 Excavators Machine System Hydraulic Tank and Filter
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Hydraulic Tank and Filter - Remove and Install
336D2 and 340D2 Excavators Machine System Front Lines
Thumb Tine Assembly May Fall Inside Bucket on Certain Mini Hydraulic Excavators {6547}
336D2 and 340D2 Excavators Machine System Track
MD6200 Rotary Blasthole Drill Machine Systems Track Roller (Single Flange)
336D2 and 340D2 Excavators Machine System Circuit Breakers
336D2 and 340D2 Excavators Machine System Track Roller
336D2 and 340D2 Excavators Machine System Circuit Breakers
336D2 and 340D2 Excavators Machine System Pump Head
Normal Performance Conditions of Engines on Certain Mini Hydraulic Excavator {0645, 1000, 1051, 7000}
A New Service Meter Unit (SMU) Is Now Used On Certain 300.9D Mini Hydraulic Excavators {5258, 7451}
An Improved Blade Cylinder is Now Used on Certain 305.5E, 305.5E2, 306, 306E, and 306E2 Mini Hydraulic Excavators {5102, 7164}
325F Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
325F Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
320E and 323E Excavators Machine Electronic Control System MID 299, 5322-4