PSP FOR REPLACING THE SWING DRIVE SHAFT ON CERTAIN 205B, 206B, 211B, 212B EXCAVATORS - COSA LETTER NO. 7 - PS6086 - MAILED COS A
NOTE:   The information supplied in this service letter may not be valid after the termination date of this program.   Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst.
HEBE1417 NOVEMBER 30, 1993 COSA LETTER No. 7 PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING DRIVE SHAFT ON CERTAIN 205B, 206B, 211B, 212B EXCAVATORS 5459 PS6086 NOTE: This Program can only be administered after a failure occurs. The decision whether to apply the program is made by the dealer. When reporting the repair, use "PS6086" as the Part Number, "7755" as the Group Number, and "96" as the Warranty Claim Description Code.
November 30, 1994
Some Swing Drives on certain 205B, 206B, 211B and 212B Excavators may not provide acceptable service life. The reason is a crack on the Swing Drive Shaft occurring on the base of the thread.
Model Identification Number 205B 5ZF1-95 206B 9BF1-702 211B 6XG1-170 212B 3PJ1-724
Dealers will need to order parts for this Program. 1 - 8U4981 Drive Shaft 1 - 8U9338 Washer 1 - 8U9337 Nut
1. Remove the Swing Drive and disassemble Shaft as shown in the Service Manual SENR4346. 2. Check whether the Swing Drive Shaft is broken at the base of the thread. 3. If broken, replace the 8U4981 Drive Shaft with a new one. The part number has not been changed. 4. Re-assemble using the new 8U9338 Washer and 8U9337 Nut.
Service Claim Allowances
Submit one claim per reworked unit. Product AVSpare Dealer Suggested Customer Suggested smu/age Parts Labor Hrs Parts Labor Hrs Parts Labor Hrs whichever (D/N) (Cost) (C/L) (Sell) comes first 0-3000 100% 10 0 0 0 0 0-24 mo 3001-4500 33.3% 0 0 8 50% 2 25-36 mo NOTE: This is a 10-hour job.
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.