Specifications
`
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
[GEBU0017]
WORK TOOL ARRANGEMENT
D6F SR, D6G and D6G SR Track-Type Tractors
Operation
584 and 584HD Forwarders
General Hazard Information
120H and 135H Motor Graders
Fire Prevention and Explosion Prevention
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
Declaration of Conformity
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders
Safety Messages
Show/hide table
| |
| Illustration 1 | g00662471 |
|
Top Clamp Bucket | |
Show/hide table
| |
| Illustration 2 | g00662469 |
|
Side Dump Bucket | |
Show/hide table
| |
| Illustration 3 | g00662456 |
|
Multipurpose Bucket | |
Show/hide table
| |
| Illustration 4 | g02132153 |
|
High Dump Bucket | |
Certain specifications will be stamped onto the serial number plate for each bucket.
- Part Number
- Serial Number
- Approved Machine
- Weight of Bucket
- Capacity of Bucket
- Width of Bucket
- Operating Hydraulic Pressure
Additional specifications on an individual bucket may be obtained by contacting your AVSpare dealer.
Information System:
349E Excavator Hydraulic System
Relief Valve (Main)
2010/03/24
Improvements Have Been Made to Bulk Hose for Certain Caterpillar Products {5057}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Disassemble
2010/06/08
The Starting Procedure is Revised for Certain Excavators and Mobile Hydraulic Power Units {1453}
C13, C15, and C18 Tier 4 Interim Engines
ARD Fuel Pressure Is Low
C13, C15, and C18 Tier 4 Interim Engines
ARD Fuel Pressure Is High
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Engine Oil Cooler - Remove and Install
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinder
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Engine Oil Filter Base - Remove and Install - Remote
2010/04/15
The Center-Lock Hydraulic Pin Grabber Quick Couplers Have Specific Hydraulic Requirements {6129}
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold - Remove and Install - For Series Turbocharger Applications
349E Excavator Hydraulic System
Solenoid Valve (Proportional Reducing) - Power Shift System
C9.3 Tier 4 Final Engines
Electric Starting System - Test
2010/03/29
Procedure to Disengage the Cable Assembly Prior to Removing the Front Window on Certain Excavators {7310}
C15 and C18 Engines for Caterpillar Built Machines
Fuel Pressure Regulator - Remove and Install
2010/05/12
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
349F and 352F Excavators Machine System
Relief Valve (Line)
Installation Procedure for 239-8695 Hydraulic Pedal Control Gp {5059, 5063}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement
Hydraulic Oil Cooler - Remove and Install
Installation Procedure for 259-5045 Combined Flow Wiring Gp {1408}
Installation Procedure for 260-7986 Pilot Lines Gp {5057, 5059}