(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Declaration of Conformity Caterpillar

Declaration of Conformity

(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders [GEBU0017]

(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Work Tool Installation and Removal

(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Declaration of Conformity

BASIC ENGINE

(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Declaration of Conformity

Show/hide table

Table 1
An EC or EU Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC or EU Declaration of Conformity provided with the machine. The extract shown below from an EC or EU Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified.


ORIGINAL EC or EU DECLARATION OF CONFORMITY

Manufacturer: AVSpare Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
			Standards & Regulations Manager, AVSpare France S.A.S 40, Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder
Description:		Generic Denomination:	Earth-moving Equipment
		Function:	Side Dump Bucket
		Model/Type:	Side Dump Bucket
		Serial Number:
		Commercial Name:	AVSpare Inc.
Fulfils all the relevant provisions of the following Directives

	Directives		Notified Body	Document No.
	2006/42/EC		N/A
	2014/30/EU		N/A

Note (1)		Technical Documentation accessible through person listed above authorized to compile the Technical File


Done at:				Signature
Date:				Name/Position

Note: The above information was correct as of June 2019, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.